Search results

You need it vector. I use coreltrace in coreldraw to separe spot colours from a bitmap image.

I'm not sure if its that plastic stip along the way at the top of the carriage, where there is a sensor reader to it. I cleaned this and cables attached to head and edge of cables to the board and is working fine now. Hope that was it. thanks friends for your tips !!!

Is it safe to clean with capping solution?

Thanks Bill for that tip! i will try that tomorrow.

where is the encoder please? thanks

I use photoprint with its rip software. The printer worked fine when i cleaned the cables attached to the heads as there was some dry ink. Thought i solved it but it making it again today.

jigsaw with fine blade, metal one will work.

Its a tiff file. I will check saved prints by the way.

Hi, Does anyone experience this kind of printing? (attached) It does it occasionally every 2/3 m run of printing. I think its a capping station, but cables to heads looks clean, and heads are working fine except the light cyan and light magenta not top condition but is this related? i...

Hi to all, I'm noticing a small air trap just above the tube which is connected to the head; exactly at the top to the connection of the coming tube. This is the Magenta. Now i'm not sure if its the capping or ink starvation. I changed the o rings and capping seal looks fine. What...

Hi, Just for anyones information the problem I had was from the ink. I got new ink cartridge and have it replaced after flushing the lines.

i'm posting the result: FAULTY INK. i have changed the ink cartridge and vuola! printed fine!

yes ink is pulling at the head, capping is ok, and damper is changed too. I should get the new ink tomorrow and see if its the ink!?!?

hi Jeremy - well, the missing part could be anywhere really, but i noticed that i can avoid this missing cut from the main cutting by sending a small circle of around 1inc in diameter with an inner circle both combined. The printer then will do the missing cut in this inner circle that i will...

hi to all. i had the graphtec ce5000 for a few months now, and the small problem i have with it is that in each vinyl cut i do for each colour it always leave a bit anywhere uncut, around 10mm long; this is mostly in inside countours. I use the coreldraw x4 and the plugin to cut. Anyone...

A new cartridge is on the way. I'll keep you informed as soon as i will try a new one. Thanks for your openions!

could it be from the ink? Ink seems flowing ok. I buy my inks from London ink jet in UK, and never had problems with them. :help

yes i posted in signfreak too. Yes, i buy them in cartridges but not from seiko. I have using these for around 3 years now.

please help! thanks.

mine are the pnc-960 roland, quite a few years ago, i use signmate elite to cut but prefer if i can cut directly from corel, do they work with corel x4 and just a driver from roland to cut. or do I need a plug in like signcut or cocut?