• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Summa D140R cutting short

    Thanks, I think the calbiration was fine it was hitting the registration points fine and cutting the 4 corners precisely but dropping in the middle, printed a perfect 20"x20" circle but cut a 20" x 19.75" oval. It has now self corrected it could have been weather related as it was a cold snap...
  2. Summa D140R cutting short

    After a year of perfect calibration my D140R is now cutting short on the X axis. Reads tha HP barcode fine, sees all the registration points but cuts short, One 22" cut will be correct at the start but off by 1/4" at the top, small 2" circles will progressively drop below the image, the Y plain...
  3. Plotter Cutting Curves Jagged

    I had similar issues very difficult to weed, tried a few new blades, turned out It was the blade holder.
  4. Papers and the L360

    Shil 3686 TriSolv works if you up the vacuum to 60% and lower the temp to 65c (150f)
  5. HP Latex 360-Flexi profiles

    I just bought an HP 360 latex and subscribed to Flexi, I was surprised that Flexi has zero profiles for these printers. Does anyone have some profiles so I can use them as a starting point or let me know where to find some? I tried the HP Printos site but I just get an error message when I try...
  6. Question Need help sourcing a weird material

    you could try https://www.3m.com/3M/en_US/p/d/v000185630/
  7. Weird ink stains on unprinted parts

    Had a similar issue years ago, something to do with static discharge when the heads weren't firing to burn off the ink particles in the air (from memory). Solution was to print white areas with 0.7% yellow (the eye can't see it) to keep a head firing at all times. Not sure if it's the same or...
  8. Used 360 or 570?

    If I had the cash, and already had some business I'd be inclined to agree, but as I am starting from ground zero with a limited budget it's not an option. running the numbers I could burn through 3 used models for the cost of a new one, I have bought new in the past and always end up with a used...
  9. Used 360 or 570?

    Yes will need accurate tiling so a very valid point
  10. Used 360 or 570?

    Cheers FrankW, If I had a crystal ball I could make a more informed decision.
  11. Used 360 or 570?

    Yes I had that issue with my 25500, only happened on 1 roll, (We would wipe it down with alcohol before printing a banner) and we were more careful on what media we bought after that. I don't intend to be big on scrim banners but thanks for the useful heads up.
  12. Used 360 or 570?

    Thank you for your input.
  13. Used 360 or 570?

    So I have been out of the game for a couple of years, as I relocated back from the US to the UK, I gave away my printers in the US before I left as I didn't think I would be printing back here. I am looking at putting a used Latex in and I have a couple of options, I can get either an L360 or...
  14. Need Help HP L25500 Supplies

    Has anyone found a reliable source for the Inks, printheads and printhead cleaner etc for the L25500 789 series inks. they are being discontinued by HP in January.
  15. Yellows are dark

    Thanks Paul Only reason i suspected something more sinister is that I replaced both heads recently and they are both cross contaminated.
  16. Yellows are dark

    Thanks Not a forum guy, I answer a few questions but not sure how it all works. but thanks i will see if there is a topic that suits better.
  17. Yellows are dark

    HP25500 prints great but the yellows are dark had this once before cleaned the heads over and over and but can't get them back. Having new Aerosol fan fitted in a couple of days as i get an error, is this the problem?
  18. Cutter Calibration FC7000 Flexi Cloud

    Hi guys, Having an issue trying to print and cut with Flexi cloud. prints registration, reads registration but cuts are way off. cuts are about perfect top to bottom but they cut in 1/4 from each side as if the cut path has been pinched/squeezed. Any ideas? HP25500>Flexi Cloud>Graphitec...
  19. Cutting Master 2/3 Working with Illustrator CC ??

    It works but you have to drag the cutting master .aip into your plug-ins extensions folder
  20. Cutting Master 3 illy 2014

    CM3 and Illustraor CC2014 Yes I just figured it out... Afetr installing it still did not show, I had to drag the "CuttingMaster3_CC7.aip" into C:\Program Files\Adobe\Adobe Illustrator CC 2014 (32 Bit)\Plug-ins\Extensions. my pc is a 32 bit so you may have to use the 64 bit alternatives
Top