Search results

Hello, Attached is a picture of the store front I am to install cut vinyl on. I want to go over the bars with the vinyl. I am wondering if any of you might have a video of how that is done. We do it one way, but I think there might be an easier way. Any guidance would be appreciated. Thanks...

It kinda says it in the title. Wasatch is not printing my cutting registration marks. I have tried different files but to no avail. I have called Wasatch that wants $600 for a 6 month service contract to help me with one problem. Has anybody dealt with this before? Can anybody help? Any...

I am to install a printed decal on the inside of a window facing out. I am printing on polypropelene and applying a clear double sided adhesive to install. Is there another way for it to be done? Any guidance is apperciated.

For the love of pete, I cannot remember this font. Any help is appreciated. Thank you :)

Hello, I am looking for guidance on banner installation. My customer is wanting 5ft x 20ft banners. My thought was to get two 5ft x 10ft pieces of MDO installed with posts and wrap the banners around. I thought was a pretty good idea until I told my project manager and he told me that it was...

We just bought a new Mutoh 1624x. We have had a previous Mutoh 1604 for 7 years, so we are familiar. We just had it set up by the installer and he installed Flexi that came with the purchase. We had previously used Wasatch ( a newer version on the 1604 ) Wasatch told us that it was not...

We currently have a Mutoh 64" 1604. She's dying a slow death after 8 years running and 3 head replacements. We've been real happy with her, and she's been a real workhorse. Now we are looking for a new printer. We've been pitched quite a bit from various salesmen on the HP Latex, and have...

Have a customer that is wanting to do some graphics like attached picture. I really do not want to spend my daughters college tuition on a "street wrap" material. Does anybody have any suggestions on another material that might work that won't leave me starving in the streets? Any advice is...

Have a problem with some black ink miss fire. We have soaked and soaked the head and cleanings. When we run a nozzle check, the second set of bars for black are missing about 70%. We replaced the black dampers, but did notice that the new damper for one of the blacks didn't fill all the way up...

We have a Graphtec FC-7000-130. We just had to update our rip software to Wasatch 7.3, and we can't seem to get the cutter connected or how to find the IP address for the Graphtec Cutter. Any help would be appreciated. Thanks

Any guidance would be appreciated :)

Please help me before I smash my head into the wall. :banghead: Thanks so much!!!

I have a customer calling for a water tower wrap, approx 6' to 7' tall by about 20' in circumference. We have done a small water tower but I have seen large water tower wraps before what material do you use? Any advice is appreciated.

Hello, I am in need of a vendor for custom printed 5x7 rug for an entry way to a church. Any guidance would be appreciated. Thanks in advance!

Hello! I am hoping some of you might have done this before. I am wanting to hang up some 1/2" gatorfoam with 1" hexagon bolt that will act like a standoff. I have seen this done before but can't quite figure out how to do it. I need to keep in mind that in time the signs will need to be...

Anybody know if there is a company that can print on packing tape? Thanks so much!!!

7 year Mutoh. Nozzel check, and black with multiple broken lines. It will not print well in wave, this after multiple head soakings, two little charges, cleaner down the capping section, lines clear, dampers look fine. Time to order my 2nd head in 8 years. I ordered it ( $2800) it's still in the...

We are doing some large backlit 1/8" acrylic panels. We will be printing on translucent vinyl. We have used several methods in the past. We've squeegeed on the prints, but with some problems and bubbles. We've also hinged the print and then ran it through our laminator, this has worked well (no...

I have attached a picture of what it is my customer is requesting. They what the same exact type of street signs, color, shape, hollow, etc. They are 1" thick with hollow center and 30" at the top and 28" at the bottom, giving it that v-shape. I need the signs and the mechanisms holding the...

I have a customer wanting (according to their plans) stud mounted cast metal lettering. This is going to be a large project and will cost them a pretty penny, which is fine by me but I know the area where these two monument signs are going to be and it is not the greatest. I just know I am...