Search results

Looking for someone to print and laminate on vinyl, Just got a job for 20 3'x4 signs, can anyone recommend a reasonably priced printhouse for this? Not looking for "dirt cheap", just a reliable, quality shop with decent prices....the addition of a new baby just makes it impossible for me to...

The ole DIY worked.... Saved myself 500 bucks..... I ordered a gear from McMaster Carr (thanks to the link in the other post) part number is 57655K36. I don't think it is an exact match as the old gear, but it seems to work fine. I took the old gear out, dremeled the chewed up gear off and...

I've had this happen twice, and am now out of spare parts to fix it. I have had a line get caught in the gears of the ink pump, and it releases ink all over the maintenance station. Most parts are fine, I can clean them and they work, but there is a plastic gear that drives the ink pump that...

I had to change some components in the capping station on my outdoor jr, and when I plugged the connector ribbon back into the board with the LCD screen, I just get squares now on the display instead of the normal text and commands. The printer works fine, it's just that the screen only shows...

Can someone help me to print a decent orange with a falcon Outdoor Jr. and Oracal 3651 glossy? I have tried a bunch of different CMYK and RGB combinations, but it seems as if it is either red or a real brown orange. I'd be happy with just a decent, normal orange. Anybody help? thanks,

I've got a falcon jr. And have had this happen twice recently. Either they get caught in the gears, or just split, but the white rubber lines in the ink pump get cut, and let ink go everywhere in the pump and maint. Station. I've pulled everything apart and cleaned it, but can you just replace...

Just bought a new computer with Vista (64bit) system. I am currently running signlab v7.1 which runs on the machine, but I cannot send any prints to the printer. The program acts as if it is sending a job (like my old computer) but it seems as if the printer can't accept it. Is there a special...

Just bought a new computer with Vista (64bit) system. I am currently running signlab v7.1 which runs on the machine, but I cannot send any prints to the printer. The program acts as if it is sending a job (like my old computer) but it seems as if the printer can't accept it. Is there a...

I think I may need to replace the T fence on my mutoh. I'm getting the overcurrent error and have tried everything, and now find myself looking at replacing parts. To replace this, is it as simple as remove the old and install the new, or is there a calibration, etc that must be performed...

Hey, I'm about to see how far I can throw my printer.... Betcha I could really give her a toss after fighting this thing the past few nites. Here's what is happening. I send a job from Signlab (v 7.1) and it seems to go to the printer just fine. The print head acts as if it is starting to...

Is anyone running Signlab v. 7. 1 on a windows operating system that is 64 bit rather than 32 bit. From the little kowledge that I know Windows vista is 64 bit and I wanted to make sure that my signlab will run ok before purchasing a new computer. Thanks for any help.

Need a little help here, I've got an older dell computer that I use to run a mutoh Falcon Outdoor Jr., Q-100 (graphtec) plotter, and run signlab and corel. I think I have a computer problem, it will lock up while printing on the falcon outdoor jr., and I'll reboot and it'll seem to fix the...

I'm pretty close to throwing the ole computer through a window..... I'm trying to cut the contour around a printed image and can't get this to work. My first problem is that I can't get signlab to give me type 1 or type 2 marks to use with my Q100 printer (same as graphtec). The manual says...

I'm leaving for about 7 days, and need to clean out the printer to be put out of use for that long. I have bought the cleaning cartridges, and plan on doing that before I leave, but is there anything else to consider? I read that putting in new capping station sponges is good, but I don't...

I know there is a link or file posted before, but can't seem to find it. Is there somewhere I can get a copy of the service manual for this. My yellow will not print at all, and this is the first problem I have encountered with this printer. I really have no idea where to start, but have...

I am looking for an older version of either Flexi or Signlab. I am a small business, and as always money is a touch tight for the software budget. If you have an older version of either that you are looking to part with, please email me at nplantz@gmail.com, or better yet give me a call at...

I am looking for a program to be able to print from, as well as contour cut. I am a small sign business, have a Q100 cutter and a Mutoh Falcon Outdoor Jr. I have used Corel Draw for a few years, and am very familiar and like the software. I realize that Flexi is the most used software, but...

Hi, My Falcon Jr. is driving me nuts..... I'm trying to print my first wrap on this, and am having troubles midway through printing panels. I first printed my side panels, they are very simple , just two colors with a swoosh type design. No problems, printed close to 13' of vinyl without...

I have a Q100 which is a graphtec disguised under another name, and am running Flexi 7.6 (I know I need to do the upgrade...). Everything was great with the contour cuts with reg marks until yesterday. For some reason the cutter (Q100) will find the first reg mark from the flexi program, then...

I just installed Flexi 7.6 last nite, and went to install my plotter (vinyl Express Q100) in the production manager, but the listing for the Vinyl Express Plotters does not contain the Q series plotters. It only has listings for the GRD-101S, 132S, 50, 60, 61, 76S, The Jaquar 101S, 132S, 61...