Search results

Thanks All!

It just wasn't curing & we were trying to press on until the replacement lamps came in... Should be a day or two.

When they installed our FB500, one of the techs mentioned that there was a way to adjust the intensity of the UV lamps, but I can't seem to find any method in the manuals. Does anyone know how to do this?

Nice one, Ted! Looks like I found a new home - 3ds Max, Blender - even Bryce & Daz have all found a place on my desk.

Yeah, you're not alone. We get a barefoot judo instructor.

We've got an HP 500, roll-roll, white ink option & rolling input/output tables that flip up and can be stowed away. It takes about 3-4 hours to swap to white ink setup when necessary, but it's really handy. We do some color print on colored coro, so that had to be an option. The quality is good...

Glad that worked out - we were having the exact same issue in my shop - (minus the bleeding!) Worked out for us too after following the suggestions - thanks! NMP

I have trouble with curves & rivets using 3551. The Oracal 3951 w/290 lam. has been my go-to for a while. We've been alternating between 3m & Avery lately, but with oddball/off brand lams & the air egress... doesn't.

HP tech Jake - Printer Up 727-688-3559

I do a lot of repetitive decals in 1 or 2 colors on an Edge 2 & cut out of the same Omega file with an Envision plotter - a real die-hard system. Sequentially numbered bar code decals run through this shop by the ton, and I really wouldn't know how else to do them except this way. Laminate...

You guys are bringing up some greats - (Black Sheep, Moonlighting, Twin Peaks) Doctor Who.

I use 3641G vinyl with 210G & 210M - no problem.

I've done a few awnings with Gorilla Grip heat transfer.

My company just picked up an Epson Stylus Pro 9800, and the people we got it from recommended "GhostScript" as rip. I downloaded it, installed it, and read through the "read me"s and documentation. I honestly can't make heads or tails of this thing - like it was written in ancient Greek...

Problem solved! In cleaning the capping station, I noticed one of the perforated metal strips that sits in each of the four stations was missing. It turns out to have fallen down into the wiper area. I pulled it out with tweezers, cleaned it up & put it back, and now I have a nice red print...

my take up core is 2" and my lam comes in on 3", and I generally swap lams often. (10-15' runs), so a new core w/ a lam change isn't in the cards for me. Stretchedcanvas is saying the same thing, I just took the long way around the barn.

http://i763.photobucket.com/albums/xx275/nomovingparts/just%20stuff/redstripes.jpg

I tape the end of the paper to the roll with a couple inches of slack in it, then kind of roll it around the core backwards with my hands. After a minute or so, the backing paper is still taped, but is loose from the core and can be slid off.

I have 2 JV3-160 sp's, Onyx, and I'm using Ink Mill inks. (btw, I had this problem before, with Mimaki inks) When I print an image, the lead edge of anything red seems to have black in it. When I print multiple copies of the same image, ( a 40x1" stripe, 100% Mag & Yellow to test ) only the...

I would think potential vandalism would put the nix on this idea. I could see kids peeling & picking at the perf...