Search results

I wrapped sailboat in Croatia (read: extreme UV, no moisture in air half of the year). Lasted five years looking good, six more changed color to black (physically burned)… We used MacTac at the time. If you apply it well (correctly) and finishing is done meticulously you should not have the...

Just use cheapest perf cut you can find (thickest, smallest holes) and don’t put any lamination or other sealer crap on it (reason: water/moisture will pool in and look like crap). Disable rear wiper too or tell customer not to use it. Make few copies for replacement and charge that in - when it...

Try using Windows 7 machine for update - with USB 1.1 or USB 2 port. Had the same problem, worked for me. Find old PC and give it a go.

I have 115 and printer quality is awesome if you’re printing on good quality vinyl, banner or wallpaper. (manual upgrade of firmware required). If you’re using super cheap materials or thiner paper it’s not so good (wrinkles and head strikes). I prefer it over my old trusty Roland VS540i which I...

Just try to put glue on mated edge. We did it on thick led signs and panels that need to look extremely good (L’Oreal, etc.). Be careful not to drip and do not touch until cured.

Glue for acrylic…

I did. You just print multiple layers. Speed is slow. Use primer on all materials. Just use Mimaki RIP with it.

First try to treat surface with the open flame for the few seconds. Should do the trick. Do not burn the material, just “lick” it with the open flame. Prvo probaj prec materijal sa otvorenim plamenom. Sekundu ili dvije. 9800 bi trebala drzat nakon toga.

Open the cutter and see if something (sensor) is bent or out of place.

@graysquirel If you can't help just read and move on. No need for this. I have the same problem with the cutter and I was able to "fix" or "do workarounds" for my friends with cheap, no name, generic cutters to do an awesome job with small stickers. I couldn't do that with HP Latex 54 --- until...

BVG - why thumb down? I own machine and I know what it can, and what it can't do. I also owned Roland GX500, GS, PNC, Roland VSi and I never experience this kind of problem. It was always a user error. With HP54 is a lottery. One cut is perfect, the next day the same one starts to "drift" -...

I have same problem with cutter. Prints are prefect (printed on HP Latex 115) but cut is really bad. 16 years of experience... can't figure it out. Roland did it better.

Yes. 54 inch "basic" one.

Print quality is fine if your settings are OK. If it's grainy, then your settings are off (I print small text and stickers with it - better than my old Roland VS540i that I loved). If you want really fine print/smooth graphics, Epson is a way to go. p.s. I think that a properly setup file helps...

Eraser... (crumbling one).

You're welcome. Problem is that they (HP/Summa) have much noise. So shielded cable is a must. Still does not explain why static IP is not working though. Enjoy.

I had the same problem. The solution is to put the cutter in DHCP mode (no static IP nonsense) and use original cable that comes with it (no other will work correctly if it's not shielded CAT6). Try and report back...

Bought...

CorelDraw 2018 is solid and fast - I like it. Working really well on MacBook Pro 2017 + Parallels 14 & Windows 10.

Parallels all the way. Everything works on MacBook Pro 2017 & 2015. I tried everything before (VMware, VirtualBox...) and Parallels 13/14 are only one that does not stutter, and actually work without taxing the system. I have installed: Windows 10, CorelDraw 2018, Flexi Print & Cut 12, Summa...