• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Mutoh Falcon, refillable cartridge question

    I have all sorts of refillable ink carts ranging from the 220ml to the 440ml. Even different brands as I am always hacking stuff together. They work however there are small nuisances I have noticed: I prefer the smaller 220 carts as they work easier. The larger ones I find myself having to...
  2. FC8600 Contour and Perf Cut questions

    I'm actually leaving quite a bit, it's more than I'm leaving when I rotate... Does anyone know of a specified amount that needs to be left? I'll set my printer up to feed that far after printing. I'm getting better results every day, I just am not sure what I am doing to get those better...
  3. FC8600 Contour and Perf Cut questions

    Unfortunately not purchased through grimco. It seems to be working great, just have to turn everything sideways now... which will get troublesome for larger prints. As far as the fc7000 flexi setup goes, I ran it as the fc8000, just didn't feel like it was working to it's full potential as far...
  4. Falcon Outdoor 48 - black stopped printing suddenly

    I am not sure about electrical issues, I blew a head fuse and that causes all ink to just dump crazy prints... somewhat the opposite. If you manually pull ink through black side, then go to print... does it print black?
  5. FC8600 Contour and Perf Cut questions

    I picked up a new FC8600 while signs101 was down over the past month and man did I miss you guys! I ran into a few problems which I have somewhat sorted out but could use more advice: 1) Contour cutting and Registration marks.I print a print, however when entering the print at 0 deg. rotation...
  6. Falcon Outdoor 48 - Getting hung up between prints

    Thanks for your response, I have yet to adjust the voltage... I saw a ton of posts that mentioned stopping in the middle of prints... however mine has no problem printing a job of any length... it just has a problem with queued prints.
  7. Falcon Outdoor 48 - Getting hung up between prints

    Hello, I've had this problem since day 1 and I have been able to live with it up until now... Mutoh Falcon Outdoor 48 [*=1]SEH FastPocket Print server connection Windows XP Flexi 10.5 Problem:When printing multiple job, printer locks up and is stuck on "Receiving [PORT]" on the LCD...
  8. Falcon Outdoor 48 - black stopped printing suddenly

    A few suggestions to look into from another fellow 48'er... - Pumping stationI've found that most of my problems come from it... They are pretty simple to dismantle and check out the insides. Mine has eaten the lines up a few times, also gotten gunked up and stopped properly spinning. I...
  9. Mutoh Falcon Outdoor 48 Printing all ink?! (PROBLEM)

    DAMN! That was a good idea… I should have done that. I ended up replacing the head… It appears to be working! So I think we can safely say the head blew? Now what causes something like that to happen?!
  10. Mutoh Falcon Outdoor 48 Printing all ink?! (PROBLEM)

    Unplugged all head cables again, checked for visible signs of problem with CMK "sockets"(?)… Everything looks fine… Debating on swapping the head out… I really don't want to yet though... Any other ideas would be greatly appreciated
  11. Mutoh Falcon Outdoor 48 Printing all ink?! (PROBLEM)

    Sigh… of course not…
  12. Mutoh Falcon Outdoor 48 Printing all ink?! (PROBLEM)

    I went to the print head cables first… I horde spare parts so I have literally EVERYTHING (minus a spare board)... The CMK head seems to be the goofy head. I have just finished replacing the head cable, the original one was older and had a small bend in one of the pins... However fired it up...
  13. Mutoh Falcon Outdoor 48 Printing all ink?! (PROBLEM)

    This is a new one for me! My Falcon48 has decided not to print what I want, but instead print a TON of all ink colors to make a nice thick black mess! In order of leading up to problem: It was printing normal prior to this… Literally minutes before this started to happen. I had noticed a bit...
  14. Mutoh Falcon Manual Media Cut Adjustment?

    Thanks Paco, Your input has given me a new direction to correct my issues, I was focusing so much on the printers parameters that I was overlooking a solution such as this. I am going to tinker with this later today and see if I come up with a solution... Or more questions! Thanks
  15. Mutoh Falcon Manual Media Cut Adjustment?

    awesome! This makes complete sense, however what rip program are you using that creates this macro? I'm using flexi 8.6, if I manually add space, it will adjust the crop marks within flexi and still not adjust media feed... I'm missing something?
  16. Mutoh Falcon Manual Media Cut Adjustment?

    Hello... I am looking for the adjustment on the manual media cut. After printing I have manual cut turned on, However I would like it to spit out a few more inches so that the printed vinyl with have enough extra to run through my vinyl plotter (for contour cuts). I have yet to find any info on...
  17. Looking for a Boulder (or surrounding) Colorado wrap company!

    Welp, I guess thats it then :Big Laugh
  18. Looking for a Boulder (or surrounding) Colorado wrap company!

    THANKS! I wanted to get forum member input rather than google input. Will look into colorado signs as well as any other suggestions!
  19. Looking for a Boulder (or surrounding) Colorado wrap company!

    Hello, I have a friend who lives out in Boulder, CO and is looking to get a vehicle wrapped for his company. I however live on the East Coast currently and unfortunately don't have the time to get out that to help out. Looking for a place to start, as I have zero Colorado connections, and...
  20. Mutoh Falcon Outdoor capping station screen

    aha!creative:: I currently run a garbage bag around my waste can to solve such issues ;)
Top