Search results

good post.. also enable the optimize cutting order: restrict media movement option in CM2(under the AdV. tab.) will help minimize movements of the head and material during plotting. But the FC7000 does have a fixed height.

sorry to hear about this issue- there really isn't a major problem w/ the pen blocks on this model, this is really an isolated case.. let us know if your problem was solved

Yea just go to your Production Manager(on Flexi) then Set up, Change Set up, select your plotter or another CE model, then choose LPT#. If you have a windows driver installed for it just right click on it and go to properties, ports, and change to LPT#.

Please let us know if this firmware solved your ploblem, also when you say bowing in the print do you mean the material is bowing on you or the actual image?\ tnx

There is a small pc. of plastic which acts like damper, this prevents metal from hiting metal when the blade goes up and down, I've attached a pick of where you can expect to find it. If necessary remove the black cover by simply loosening the screws, then clean this plastic pc. w/ alcohol and...

#1 you should call Graphtec tech support, they get you up and running really fast- they wont teach you everything about your plotter but they will mention the basics. My best advise is to forget about cutting from the RM software and the controller- since you have corel Draw Graphtec has a plug...

The control panel and the cover are 2 separate peaces, the control panel also called Sheet Switch(this is how you will ask for it when u contact Graphtec) is basically just a sticker, clean the surface on the cover w/ rubbing alcohol, allow to dry and stick the new one on> if your fixing the...

I basically gave you 2 instructions, 1 was to check your page size: Pause, NEXT, until you find page size, enter, 1196in, enter. then go ahead and find Command, EnTER, ENTER check the step size,make sure that is set to what ever you have under step size in the cm2 window under Adv. basically the...

-To much blade length - wrong blade selected o the cutting cond. - blade holder needs to be replaced,(I hope this is not the original blade holder):)

Hello, Double check what was suggested to you before regarding page length: (not sure if I missed you mention the exact model I'm assuming you have a CE500) -PAUSE, NEXT until you see Page Length, ENTER set to 1196in ENTER,- then press NeXT until you see Command, ENTER, GPGL, ENTER, MAKE SURE...

hey, What do you mean by align error? on a Graphtec the only ALIGN error you get is a "realign roller" error message when you don't have your push rollers on the correct position(underneath a black sticker), what software are you using? **now, if you mean that once it cuts the cuts are off...

make sure your working a full version of Adobe Ill. demos, copies, student version will not work. this is the #1 symptom of a pirated copy- i'm not saying that you have but if it works on one computer(that tells you yo have a working copy of CM2) but not in another and on that one you really...

First thatn anything check that you have the correct blade selected in your cut conditions, if your using the blue nob blade holder then make sure you see 09U on the display as part of your cutting conditions. once you make sure of this double check the combination of blade length and cutting...

wow..no good people uhhh. Tech support was right! the controller does not work in HPGL language mode but it does have the ability to change your plotters command automatically to GPGL for what ever you need to do w/ it, so when you plotter reads port is busy is because the usb controllers are...