• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. JV3-130SPll With Flexi sign Print margins

    I was looking to see if there was a setting somewhere I had over looked that would change the print margins to a smaller margin that way I had less waste on the sides. I have a JV3-130SPll. I am running Flexi sign 10.0.1 software and Rip software. I have done the calcualtions and it would over...
  2. Mimaki jv3-130spll yellow issues

    We have replaced all o rings that we can.But I do get an air bubble by the fitting close to the damper.I have a new tech on the way hopefully he can help us. Thanks again
  3. Mimaki jv3-130spll yellow issues

    same problem again ok , having the same exact problem again. Yellow dropping out, We switched the dampers without taking the lines loose and the outage changes to the other side, I have replaced head and dampers,wipers. Could the manifold be bad? Thanks Again
  4. Calling any Mimaki techs in or near Atlanta

    I am looking for new service techs for a JV3-130SPll I currently have in Douglasville, Ga.Please inform me of you trip charges and Per hour charges. Thanks:thankyou:
  5. T

    I am looking for a service tech to help me with some issues on my mimkai jv3-130spll in...

    I am looking for a service tech to help me with some issues on my mimkai jv3-130spll in Douglasville,Ga. What are your trip and per housr charges and can you help me, Thanks
  6. T

    I am looking for a service tech near atlanta, I have a Mimaki jv3-130spll If you repair these...

    I am looking for a service tech near atlanta, I have a Mimaki jv3-130spll If you repair these what would be the charge to come to Douglasville{trip and per hour} Thanks
  7. Mimaki jv3-130spll yellow issues

    Well the tech said i cant help you and left, We have determined that there is air coming from under the capping station in the yellow tube but no air going into the head, the lines all the way up to the head are air free but when you pull air with a syringe from the discharge hose you can...
  8. Ads On Wheels.com

    We are in Georgia and have had several incounters with ADS on Wheels, They have been great for us and pay on time. Thanks
  9. Mimaki jv3-130spll yellow issues

    I have the tech out here now and he says hes done all he can to fix it and I need to find another tech, Yes it was a typo My mistake Sorry for the confusion.Ill try some of your ideas and get back to you thanks again for the help.
  10. Mimaki jv3-130spll yellow issues

    so after switching the dampers and leaving the hoses attached to the original damper, Now the right head{which previously worked fine} is not printing at all and the left head is only printing a very little bit. I dont know what else it could be. We just replaced the inline filters today , the...
  11. Mimaki jv3-130spll yellow issues

    When I suck the fluid I watch it go from the bulk ink tank to through the hoses into damper and out head,yellow will then print for about an inch before dropping out on the right side again. I just replaced both dampers but I will switch their places to see if the outage changes from right to left,
  12. Mimaki jv3-130spll yellow issues

    Hi Everyone, Was looking for some advice on an issue my printer is having mimaki jv3-130sp11 I do a test print and half of the yellow on the right side has gone out. I have replaced so far, Head,dampers,both pumps,capping station, filters on bulk ink system in the past 2 days. I have tried...
Top