Search results

thank you for the input. I should have mentioned that we have about 15 employees and annual sales are around 1M. We are adding marketing staff and hope to increase the business by double in the next few years. We currently use Estimate, wish we out grew many years ago, an extensive accounting...

Does anyone use the software Cyrious or Casper? If so can you tell me how you like it and your thoughts on it. Thanks.

Just bought a Mimaki JV300-160. Can anyone tell me how to get in Service Mode? I know how to get in it on the JV33 but this one is different. ALso. when I'm printing the carriage goes all the way to the left instead on just printing on the media. What setting is this that I need to change...

I had a respectable tech guy come out yesterday to change out the Y motor and pulley system in my JV33 because it was screaming loud while it was printing. After the repair work was done then screaming is even louder than original and the tech guy swares up and down everything was done just...

I just updated to Flexi Cloud from Flexi 10.5. I use to print certain jobs on Error Diffusion and Error Diffusion 2 on Flexi 10.5. Now when I try to print that way on Flexi Cloud it is a horrible color and not correct. It will only let me print on SO Diffusion. I am using the same profile...

So I have tried every cap setting known to mankind and still cant get the left side magenta to fire correctly. head is 5 months old. All dampers, cap station, pump and wiper have been replaced. All parts are OEM. Any suggestions.

So I am completely stumped on how to fix this. I print alot of wraps and after I print a panel and the head goes back and sits on the cap station I will lose half the magenta color on the far left side of a test draw. I have to do a normal cleaning everytime i print a panel to get a good full...

I have not. Im not sure where to look or what the plunger is at the back of the cartridge

I am stumped on what may be causing this problem. I have a beautiful test draw on 7 colors but am missing the 8th color (Magenta). When I do a normal clean I have the perfect test draw (all 8 colors firing correctly). I wil then send a print and let it print. Then after it prints I will do...

Thanks Chris, I only use OEM Mimaki parts so I have the OEM damper in. I do not have a clogged head as i checked that as well. ANd I just changed the capping station. I am still getting the same results. I also checked the coupling fitting above the damper and it's good and tight. Not...

I have a JV33 that is a year and a half old and haven't had any issues until now. when i do a test draw I am missing the far left Magenta color. All my other 7 color test perfect with no nozzles out. I did change out all 8 dampers because this is the first time I have changed them and figured...

I have a Mimaki JV33-160 that is 2 years old and it literally screams when printing. Sounds like the bearings in the Y axis motor are gone bad. I dont think the whole entire motor needs replaced though because it still prints great, it is just super noisy. I have a brand new JV33 that I just...

Does anyone know how to re-adjust the head on the JV33. I have had it for over a year and have printed on it a lot. Just think I need to adjust the bi-calibration.

I am having trouble cutting printed vinyl on my plotter. It reads the rollers and then when I hit the down arrow key + Next to feed it up or down it takes off on me real fast then cause it to have this steady beeping noise and a Y motor axis error in the screen. Any ideas?

I am having trouble cutting printed vinyl on my plotter. It reads the rollers and then when I hit the down arrow key + Next to feed it up or down it takes off on me real fast then cause it to have this steady beeping noise and a Y motor axis error in the screen. Any ideas?

Anyone know how to not lay down as much ink while printing. I know you can turn the Output down below 100%, but is there another way? I have a JV33-160.

Anyone else using this 3rd party ink for their Mimaki JV33? What are your reviews about it?

yeah i know a lot of people hate 3M, I havent had any problems out of any of their materials until I bought the IJ8171 window perf.

Pam said you turn her on!!!!!!!

ok, what do you think the heat should be set on? and if i have the heat on as low as possible then what about the ink not drying and sticking to the back of the roll when it is rolled up on the take up reel. And Im sure i can roll it out from behind, but I print about 30' at a time and...