• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Printing to mylar bags

    have you tried with a UV flatbed? I'm sure it can be done....
  2. What do you use to dust off prints?

    We do the same thing in using scrap vinyl/laminate to clean off the roller. Also, a rinsing in the sink with straight water will get off the hard to take off specs of stuff that sticks to the roller. I do have a question on static control. Any good ideas out there to minimize static...
  3. IV

    moultrie

    moultrie
  4. What do you use to dust off prints?

    We also use what eahicks is using to clean off dust. We have used swifters but if the swifter catches an edge of something sharp, bits of the swifter will fall off onto what you are laminating (defeats the purpose). After using the silicone roller, we then use a high powered LED flashlight on...
  5. SC40600 Media Profiles

    Great point dtsimages! We do the same as suggestion by our machine installer.....it covers just about any of our vinyls. We have some that may need the temps adjusted down (due to the heat being too high on the preheat, print and post print heater zones), but we simply manually adjust these...
  6. Suggestions Car Wrap Templates?

    Signelements has some as well.....
  7. Need recommendations for POS best point of sale system

    We use Quickbooks Premier hosted through Rightworks Network. It tracks customers, estimates, sales orders, invoices, inventory, etc. We have been pleased with it and several youtube videos out there to help you out when you get in a pinch with Quickbooks since many use it. Hope this helps!
  8. Best Medical Gloves With Ecosol Ink And Cleaner? Vinyl, Latex, Nitrile, Etc...?

    I use these from Uline for both Ecosol and our UV inks....cheap, easy to put on and off and toss. https://www.uline.com/BL_972/Poly-Food-Service-Gloves?keywords=polyethylene+gloves
  9. UV Flatbed - Stratojet

    Hi: We have a EFB-2512.
  10. Need Help Glass Wall Sign

    Sounds like an option to provide to them: Where do I purchase this material? Thanks!!
  11. Need Help Glass Wall Sign

    Hi: I need help identifying a supplier that can supply cut glass blanks with holes for standoffs for a rooms they are wishing to put in at our local college. The size they are looking for is 3/8" to 1/2" thick and 18" wide by 8-10" tall. Any help would be most appreciated!!! Thanks!!
  12. IV

    Howdy: I see you have a Stratojet too...we have the Shark 4' x 8' CMYK with white....may be good...

    Howdy: I see you have a Stratojet too...we have the Shark 4' x 8' CMYK with white....may be good to stay in touch with each other in case we need to assist one way or another....we've owned ours for close to 3 years now..... Bob
  13. IV

    Howdy: We too have a Shark CMYK and white.....might be good to stay in touch with each other to...

    Howdy: We too have a Shark CMYK and white.....might be good to stay in touch with each other to assist when needed. Thanks!
  14. Single Post Stake for Polystyrene Sign

    Hi: I'm looking for what you see in the attached photo for use on polystyrene signs that will be placed in a yard. I tried several suppliers but all struck out. Any one know of where to search/shop? Thanks!
  15. IV

    Howdy: I see from your postings that you have a Stratojet UV Flatbed as well? We have a...

    Howdy: I see from your postings that you have a Stratojet UV Flatbed as well? We have a EFB-2512 with CMYK + White. What kind do you own? Bob
  16. Paper Car Service Mats

    Hi: I have a client that has asked if I can supply paper floor mats with their logo used in servicing a vehicle. Does anyone know of someone that offers these wholesale? Thanks much for any feedback (in advance)!
  17. Stock Acrylic or Glass Shaped Blanks

    Good morning to all: I'm interested if anyone knows where I can purchase blank acrylic/polycarb (1/8" thick or so) similar to the racetrack shape in the attached photo? We are looking to put some standoff acrylic name plates on doors and would like to find a source that has them ready to...
  18. Pesky dust particles

    I agree with reQ's suggestions, but had somewhat of the same issue after taking his recommended steps when laminating. Seemed some stray airborne particles landed while laminating or fell off the backing material of the laminate. I went to the hardware store, purchased 3/4" pvc, drilled...
  19. Narrow Colored Vinyl Tape

    Hi: Just had a customer inquire if I could supply him with either 1/2 or 1/4" wide colored vinyl tape. I suggested I could cut colored stripes for him on our cutter from a 24" colored roll, but he was more interested in narrow line vinyl tape on a roll versus me supplying a sheet of cut vinyl...
  20. Angled Sign Bracket/Post for Nursery (the garden variety) Signs

    Hi all! I am needing to put in some signs for a local nursery and they are asking for signs (at around knee/ankle height) to identify various plants for sale, etc. Does anyone know of a source where I can procure 45 degree brackets that can be placed onto a post to hold up the sign itself...
Top