• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Need Help HELP!!! Onyx 11

    Hi Guys, Just has a catastrophic HD failure and had to rebuild. I had Onyx 11 and was able to install from a downloaded install file, but the printer installer files are gone. Anyone have the hard copies (dvd, cd) I need a prninst file for a mimaki JV33-160. Onyx only has the files for 12...
  2. Need Help JV33 misfire black channel

    Im getting a misfire on one of the black channels. When I print an image, it looks as if Im getting a color bleed, like when a damper gets a few drops of different ink in it. Upon further inspection of the color bar that is printed along the margin, I noticed a set of black dots printed directly...
  3. Ultimate JV3 Diagnostic Challenge, open to any tech or other superpower

    First off, yes, I do still run a couple JV3s.... My oldest machine is a 160s running 6 color config. I began having what appeared to be starvation issues. I noticed while printing 720x720 slow speed. I would begin to lose approximately 5 - 10 nozzles per pass, until pretty much, no print at...
  4. JV3 Parameters needed BAD!

    Hello all, I came in this morning only to find my JV3 160SP on and stuck with Error 04 Flash Rom. Looked up the code to find it being the main board. Not to worry right? I have a 250SP that has no heads in it right now and thought Id rob the board from it. All went perfect until I tried to...
  5. Mimaki JV33 Parameters

    Does anyone out there have a list of the JV33 parameter meanings. Some are obvious and others make no sense at all, and since there are a bazillion different settings, it would be nice to know what they represent in English terms. I ask because I have a JV33-130 machine that has a used...
  6. JV33 Used Main Board replacement

    Hi Guys, I have a real head scratcher. I purchased a used Mimaki JV33-130 that needed a main board. It was a good enough price for something to tinker with. Anyway, I found a great price on a used mainboard and bought it too. I put the board in, booted up (without errors) and noticed it...
  7. Profiles for Onyx - Mimaki JV3 ultra

    Im looking for any profiles that someone may have made for the Mimaki JV3 printers using the Ultra driver from Onyx. I cant find anything for 3M products using the 6 color configuration with SS2 inks. Any help would be appreciated.
  8. Cool Mod to my JV3 250

    I know someone has probably already done this, but here goes anyway. We bought a JV3 250SP a while back and it prints great, problem is that it is not really practical for the smaller stuff that we print on the JV3 160. So we decided to hack up an older 160 machine we have in the shop and...
  9. JV3 250 Odd lines coming and going.

    I have a hair puller. My printer is printing beautiful overall, but sometimes, randomly it will print vertical lines. At this point only the cyan head seems to be firing the line. Whats weird is that the lines gradually fade in and then fade out within 8 or 10 inches. It seems they appear...
  10. Onyx issue???

    Im posting this for a friend who is running Onyx 7.3 with Mimaki JV3 160SP He is having issues with the print dropping out after some distance into the material. Im pretty sure he is getting an error 23 on the console just as the image stops printing. The software has been reinstalled...
  11. Mimaki Pump Mods

    Anyone attempt a mod at the JV3 style pumps? It seems to me that this is the absolute weak point of the machine's ink train. Every pump I buy doesnt work very well and many only work on 1 side.....worthless. Ive seen some information about an upgrade on Rolands pump setup and wondered if...
  12. Installing second JV3

    I need to setup Onyx to print to my second printer (JV3 250) Ive been working on it for a while and now its ready to make me money. I currently am running Production House 7.X and have a JV3 160 running, connected via firewire on the rip machine. So, to install the second unit, do I have to...
  13. JV4 Parts

    We have a JV4 that we will be parting out. Heads are gone, and we have taken off a few items but its mostly intact. Let me know what you might need and I will let you know if we still have it.
  14. JV3 250sp

    :banghead: We have a JV3 250 that we bought used. Pretty beat up, but we got it real cheap. Its running 3 head config with 6 colors. After much troubleshoooting and parts replaced, we finally got some decent heads in it and we arent getting anything from the cyan head. Flow is good, and Ive...
Top