Search results

Cool man thanks a lot!

Also, do you recommend any CLEAR app tapes for wall decals? I really wish I could find a good one just because they roll so much nicer with no wrinkles or bubbles and look so much better when packaging and sending them to customers.

Ok cool, I will order a roll of that tomorrow. The stuff I currently use is perfect tear main tape gxp-750 I looked it up and it seems to be a medium tack tape :( After it sticks nicely to the transfer tape does the vinyl apply to the wall easily? Thanks a lot!! :U Rock:

Hello everyone! I have been browsing around for a while looking for a new vinyl to use for my wall graphics I create. As of now I have many rolls of oracal 631 for its MATTE colors but I have an issue with some colors not wanting to stick to the transfer tape and it really ticks me off...

Thanks a lot for the tips and advice! I appreciate it and yea I agree with rather having it place easy on the wall.

I'm trying new transfer tapes.. I am still sending people what worked best for me.. But I have no problem applying to matte walls. Just glossy with these transfer tapes.

Yea, I adjusted the settings so now it barely shows on the backing paper. I tried with both transfer tapes and I believe the low tack one worked pretty well. I put hardly any pressure on the decal and when i peeled the transfer tape EVERY SINGLE letter was sticking to the transfer tape. Also the...

Yea I actually set my settings to where I can barely even see the outline of the vinyl on the white backing paper on the FRONT side and the letters did stick better to the transfer tape this time. I used the low tack clear transfer tape but when I went to put it on the wall it was not sticking...

Yea I have tried both applying gentle and hard pressure with both transfer tapes.. What I did notice was that the WHITE vinyl from oracal worked PERFECTLY and grabbed every single small detailed piece.. "The design had over 200 small circles and other parts" when I used the clear GXF341 from...

I currently use a GRAPHTEC CUTTING PLOTTER CE5000-60 to make wall decals. I use oracal 631 vinyl I am having a very hard time getting the vinyl to stick to the transfer tape I use before sending them out to my customers which is really frustrating me greatly right now since I have a bunch...

I was having issues with my new graphtec CS5000-60 Cutter Plotter for over a week and had many orders to fulfill. CiberSupply was generous enough to let me call him up and he guided me threw some possible problems and we made sure everything was working smoothly. I later had problems...

Thanks again for all the help buddy!

THIS TOPIC IS CLOSED! CiberSupply has connected via my computer and has took the time to manually look through all my settings and find the problem for me. Thanks so much!

Yea, I called the place I bought it from and they said it seems like a technical issue and gave me the number to graphtec. I complained, telling them I have had it for several days trying to figure this out and i told them what was wrong and they didn't try to help or a "sorry to hear that"...

Thanks! Still no luck though :( It still will not cut in the bottom right hand corner. Same problems :/

Yea I used the arrows to place the cut at the bottom right hand corner setting the origin. Then after I click send in flexi it rolls like 3/4 of the vinyl then starts to cut like in towards the middle. I'm still trying to figure it out haha

Has anyone have had trouble with aligning what they want to cut? When I use flexi starter 10 it will NOT cut in the bottom right hand corner for some reason. Any suggestions?

Cool thanks! That solved the problem of it cutting those little letters. But now I am back to my old problems :( I have a sheet of vinyl in right now. I have a basic text graphic for it to cut in flexi. When i tell the cutter it's "ROLL 2" and I push send from flexi all the cutter...

Hello everyone! I just bought a new graphtec ce5000-60 and bought flexi starter 10 to cut basic 1 color vinyl graphics. I make all my eps files in illustrator and simply import them into flexi and cut. But now with the new graphtec I am having troubles doing so. I used the the robo...

Thanks again all for the suggestion and help! CiberSupply, I have the correct settings for the bottom right hand corner for flexi and I manually moved the blade holder all the way to the right side and clicked origin and i told me it was set... butthen when I clicked the send button in flexi...