I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Hello everyone,
We have recently decided to print on ACM with our flatbed. We use L100 inks and are getting odd smudges or issues every once in awhile. We have torn the laminate off and printed, we have torn the laminate off and wiped with alcohol(even worse) and we have 3 - JFX200 printers...
Hello have been in the flatbed world for over a decade and recently purchased an Epson S80600L, S Series Summa and Laminator and Onyx software
We are turning our current product line that we do on other substrated into stickers for our customers. I am running into a few questions/issues.
1...
Hello we have one of our Mimaki JFX200 macines acting up. We have been getting the system fault error SYSTEM HALT (*) 509 : HDC POSCNT. It is happening in the middle of the print job usually toward the back of the machine and the head assembly stops at or near the the capping station.
We are...
We have a 4 x 8 table flatbed printer and I was wondering if any of you have every increased your suction with a larger vacuum pump on your flatbed printer?
We are looking for advice on the best entry level roll to roll $15k-$30km under 72 inches most likely.
Our early focus would be to make make die cut stickers so we are needing the printer and wanting to go with a summa or graphtec cutter most likely the Graphtec FC9000.
We were leaning towards...
Hello, could someone please guide me to a solution to manufacture die cut stickers and labels. Trying to find a fest efficient machines that might be used by some of the bigger sticker and label companies.
Looking for something that might even include labels being cut with lasers etc...
Hello, we have 3 JFX200 flatbeds and two of them are about 2 years and 6 months old. One of those is presenting a perfect test draw but we are having issues with banding/ lines. Mostly when we print green colors.
My question is, why would a printer with a perfect test draw all of the sudden...
Hello, I am new to roll to roll as we only have 3 UV flatbed mimaki printers. We were printing onto reflective material on the flatbeds and as expected the life is shorter than we would like and I was just curious if someone could recommend a good latex printer that would qualify for the 3M™...
Yes we are looking for someone that can color match 3-JFX200 together. We paid someone recently to make the color matches but in the end they are not putting down the proper colors. Do any of you have someone that you've worked with in the past that might be able to help?
So we had to replace a couple heads on our jf 1631. We replaced #2 turned on the machine everything was fine, then I replaced #4 and turned it back on and we got a error 108 hd thermos 7. So I replaced the fpc to print head 7 and then we got the error 108 connect 7 message. We don't even use...
Hey everyone. Seeking some guidance on a new issue this morning with our JF1631. We recently replaced the y axis motor and are having some issues with alignment on the cap and wiper. I do have the plastic cap alignment tool but the issue I am dealing with is I cannot get the head to align to...
We have two fairly new mimaki jfx200 2531 and run rasterlink 6 on both and all of the sudden one of them is not printing a gradient the correct or normal way. I have attached images and seeking some help. Bear in ming these are the exact same files and both printers are ran with independent...
Hey everyone,
Just curious where everyone is getting their products to laser engrave at the best prices,
Glassware
Leather toilet bags
flasks
knives
well about anything?
Hello everyone,
This is something I should have asked some time ago but we print on aluminum .040, .063 in various shapes and print full bleed.
We are looking for the best solution, currently we have older flatbeds that we print our layout on the table and then just align all of our blanks and...
I see a few posts about water tank route errors. Any solution on this as we have to use a blow dryer to increase the water temperature at every startup. Was doing it on 1 of our machines. Now two of them.
We have to use the blow dryer during the power on maintenance count down every time...
I replaced rubber caps and one damper and now I have tried to restart 4 times. There is normally a power on maintenance countdown. Right now on my first restart it started at 1, jumped to 12, then went up to 13 and stopped. Then powered down and unplugged and this time it showed 1 real quick...
Hello, I recevied some pink RV antifreeze when I bought a used jf 1631 mimaki and I was just wondering. Anyone use a substitute antifreeze, rather than the mimaki pink anti freeze before?
Hello I am searching for a mimaki JF 1631 Technician in the Midwest area. If anyone can offer advice on this matter or point me in the right direction.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.