• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. CMYK not original...vj1204

    I had somebody unlock the inks through the firmware. It cost me a few quid (Bucks) !! but to never have that issue again feels amazing, i've spent so much time in the past messing about with CMYK not original etc. Now i have my bulk inks in, no chip cards and my inks are showing 100%...
  2. CMYK not original...vj1204

    fixed for good ! i'm sooooo happy !!
  3. CMYK not original...vj1204

    Hi All, I have the very common problem of CMYK not original on my 1204 bulk system. Had the system for years so i've been through changing cards etc. What would always work is when the power is off, taking out the cartridges, switching the machine on and when prompted inserting all the...
  4. Valuejet 1204 1/2 blurry

    I've reacently replaced the PF sensor, I'll try cleaning the CR sensor, but my thinking is if the sensor is dirty why wouldn't all the print be blurry??
  5. Valuejet 1204 1/2 blurry

    Hello Everybody, Hope you day is going well. I have a little issue with my valuejet 1204. Whan i print i have a problem with the images/text at the right hand side of the machine being blurred but the left hand side of the print is perfect. What is going on? The nozzles are fine, i've cleaned...
  6. valuejet 1204 weird banding !

    Nice one Chris, thanks mate... seems to have done the job, I'm just about running 100% now. I have one more little problem.....! As I print the first 12" from the right side is ok then for the next 20" there is fuzziness around the print then the next 16" is ok....guessing it was possibly CR...
  7. valuejet 1204 weird banding !

    Hi All, Have a problem with my valuejet 1204, hoping somebody can shed some light! It prints good for 2 inches and then shows some wave banding for 2 inches then good for 2 inches then banding waves for 2 inches and so on !! Nozzles are fine, can't get my head round how it can be good for 2"...
  8. valujet 1204 E067 error (pf encoder)

    Problem Solved! Replaced the PF encoder but didn't put on the little white cap that holds the encoder disc from the reader. So put the cap on and away it went!! cleaned the CR encoder, it was filthy! Think i'm now qualified on all things encoder now!! Thanks for the advice Sean
  9. valujet 1204 E067 error (pf encoder)

    yes, i changed the PF sensor that reads the encoder wheel and also the encoder wheel. good to know it could also be the cr encoder, i'll have a look at that, looks a bit of a job getting into that!
  10. valujet 1204 E067 error (pf encoder)

    hi fatcat, were you getting a PF encoder fault even though the problem was with the CR encoder? I've replaced the PF encoder and still nothing !
  11. valujet 1204 E067 error (pf encoder)

    No further forward ! I've changed the pf encoder so it's not that. The pf sensor has a red beam on so i don't think that. The motor does a 1/2 turn when switch on so i don't think its that. I mean it only went wrong when i cleaned the encoder.... Please help !!
  12. valujet 1204 E067 error (pf encoder)

    Hi All, Looking for advice on this one, I've just fixed a F2 head fuse on my vj1204, thought i was up and running again! but it seems not .... I have a E067 error, before It appeared i cleaned the pf encoder with alchohol solution, has this possibly damaged it and given me the error problem...
  13. 1204 not clogged but prints nothing?

    Located the F2 fuse, it is small!! It also seems to be the problem, i've ordered a couple an will have one soildered in tomorrow. Thanks for your help guys.
  14. 1204 not clogged but prints nothing?

    Happy New Year All! cables haven't been crossed, guessing it's this F2 fuse but not sure of location. Have noticed a red light flashing on board at "LD2" and a solid red light on at "LD1" not so sure if they were like that prior to head not printing? any help well appreciated
  15. 1204 not clogged but prints nothing?

    Thanks for that DSD but I haven't got the PM with the picture
  16. 1204 not clogged but prints nothing?

    Had sombody check the board, 5 different fuses but all are ok? Surely it would fuse before damaging the main board to the point where the full board would need replacing....i'm hoping its not going to come to that!
  17. 1204 not clogged but prints nothing?

    Wonder if someone can help with this one?? It has me baffled, I replaced the manifold on my print head put it back in and it doesn't work at all. It cleans ok with ink coming through but when i do a test print no nozzles print at all. I've replace the head and the cable to the head but still...
Top