Search results

The best blade: https://www.edwardmathias.com/index.html - - - I've cut a lot of MX material with graphtec, until I stop working. The original CB15UA-K30 blades are 90 euros :(. I have broken enough, until I use blade www.edwardmathias.com. The original Graphtec blade holder is very bad, of...

Explain me wrong :( Change of blade, depending on the material I cut a lot of Motocross material, 530 microns, and polymeric materials and cast., The change is not by wear, it is by cutting different materials with different blades :)

Thanks for the answers., The problem is when I change blades, I do it three times a week, and you have to re-adjust the length of the blade. I find it very complicated to adjust the length. Ideally, just adjust the MX vinyl cut and let the nose wheels support and roll over the material. The...

Hello I have problems when calibrating the cut length of my summa S CLASS TANGENTIAL. When I cut thick MX material, there are areas that the cut deepens more than others. The slow, curved zones, with the same pressure and speed and in the same file, cuts them much more, cutting even the...

Only 1 cut pass ? Thanks

The length of the blade is correct, I have made several tests of strength and blade length. Someone who uses Summa Tangential and can give me pressure data and blade type ???? I think too much force 560 to cut this material., The plotter is new

Hello ..... I'm Pedro from Spain. I have a Summa S Class Tangential and I have problems cutting the laminated vinyl substance, What pressure do you use? What kind of blade ???? I have to put 560 of force and 45 degree blade at 200 speed, to make an optimal cut. It seems to me a very high force...

Hello Ard 88..... I'm Pedro from Spain. I have a Summa S Class Tangential and I have problems cutting the laminated vinyl substance, What pressure do you use? What kind of blade ???? I have to put 560 of force and 45 degree blade at 200 speed, to make an optimal cut. It seems to me a very high...

The best result I've had, is with a blade of 45 degrees to 560 strength. I think it's too strong. My Graphtec FC 8600, cut to 450 of pressure., I think it is a problem of thickness of blade, the tangential blades are much thicker than those of drag. Does anyone have the same plotter to cut cross...

200 speed. My old Graphtec fc cut 450 force perfect

Yes , black nose .

Cutting Motocross Vinyl. Hi, I'm Pedro from Spain. I received my new Summa Tangential S CLASS a month ago. I have problems when cutting laminated motocross vinyl, 500 microns, substance. My old Graphtec, cut in a single pass the material to 450 grams of force. With the Summa, the cut is bad...

I use AUTO comanD

The problem is that the blade cuts and goes crazy and goes up, and makes the cutting movement in the AIR!

The error only USED user CB15 .If used user CB9 is perfect ¡¡ and if used USER CB9 and blade CB15 is perfect

yes, I have reset the plotter On + arrow above It keeps giving failures. I have updated the firmware to version 2.9 ,,,, This failed I have done it in 1 year 2 times ... the technical service DOES NOT know how to solve it

Hi, I'm Pedro from Spain. I get in touch with you, in case you can help me. Here in Spain, they do not solve my problem I have a Graphtec FC8600, 1 year old, and it gives me cutting problems. The problems, ONLY occur when using the CB15 blade, with a pressure of 45 and speed 8, CB15U-K30 I...

Amigosa Hello, I am Pedro from Spain. I bought one month makes a graphtec 8600, I have problems when cutting contours. Brands reads well, but when not cut short by the site, cutting out displaced. I do a calibration and portrays one cut well, but again cut day evil. Any solution ??? Thanks from...

I made a small graphtec tests in the dispenser , and cuts once, but slashing the blade on vinyl . You can tell the type of blade you use , if the portal red blades and pressure and speed you use? thanks

Cut vinyl motocross Hello friends, I am Pedro from Spain. We are beginning to manufacture vinyl kit for motocross bikes. We are using vinyl and laminated substance, great material. I have trouble cutting vinyl and laminate. We use a plotter SUMMA D120 blade 60 degrees and I have to give...