• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Question Using SignLab 9 with VersaWorks 6 Challenges

    Correct, files can be exported as an EPS and import into VW. But the combination of being spoiled when Roland and SignLab work together and seeming that the process is going backwards and making it a bigger procedure than necessary, I was seeing if anyone found a good way around it possibly...

  3. Question Using SignLab 9 with VersaWorks 6 Challenges

    Seeing if anyone else is in this position and what's the best way to make it work. For years have been running SignLab 9 with VersaWorks on a VS540. I added a Roland VG2 and it won't run with VersaWorks that comes with SignLab 9. So I added VersaWorks 6. After using the SignLab built-in link...

  4. Signlab Changes Colors

    When I render to bitmap the color changes. Thanks for any ideas as to why? Setings: Color management - Roland VersaWorks US SignLab 9.1 Steve Superfast SIgns

  5. Roland Versaworks Ink Saturation

    Is there a simple way to increase the ink rather than going through all the profiles to see what each one does? I know I can make minor adjustments in each CMYK to tint, but looking to see if there's a better way. I'm printing red on silver metallic and would look better if I could apply more...

  6. Mouse delay / sticks with Signlab

    That's the confusing part. If it was the computer, it would struggle more with large raster files, not vector. I threw in the generic "fast computer" to rule out the computer. Only a month old and has been fantastic. Had it checked out yesterday to make sure. Updated a graphics driver to new a...

  7. Mouse delay / sticks with Signlab

    When resizing or moving objects with the mouse, the mouse actually moves but there's a delay for it to execute. Has a longer delay with more contours and bitmaps on the screen. Strangest thing is there is a longer delay with a box full of text and vectors than it does with a 10' bitmap...
  8.

    Strange Roland Test Print

    Thank you!!
  9.

    Strange Roland Test Print

    I Like the cap top idea over the head and will look into adjusting it first. I did dig into it a bit deeper and wondering if this picture tells anything more. The test print looked the same before and after I changed the cap top and dampers though, so I'm wondering if it could be a cracked...
  10.

    Strange Roland Test Print

    Anyone have a test print with multiple colors in a strip? Cyan is in front and rear of one of the yellow test patterns. In the morning before a cleaning, the one yellow is completely green in one of the yellow tests. First thought was the head. Now possibly thinking it may the the manifold...

  11. Replace Roland Print Head

    Thank you both, very much. Steve

  12. Replace Roland Print Head

    Has anyone had good or bad experience from buying a new Print Head from anyone other than Roland or Roland Distributors? Re: VS540, 4 color Cyan ink leaking into yellow prints. Cap top and Dampers have been changed. Thanks for any info. Steve

  13. Colors don't match Color Chart

    SignLab w/ Versaworks VS540 Roland I just ran the built-in Color Chart Type 1 in VersaWorks, selected the colors I wanted. Added them to my graphic. When I printed it, it was not even close. All 3 colors of blue are 3 different purples. Any ideas? Thanks, Steve

  14. Poll: Are you printing CMYK, or RGB files from Versaworks?

    Please Help I know this is an old thread, but posting this in the Signlab or Roland forums has gotten no response. I cannot use a CMYK file if I send from Signlab through VersaWorks to the Roland printer. The CMYK pictures appear like negatives. All white is black. If I import the file from...

  15. Daige Solo Laminator

    Daige Got a Daige 38" a few months ago. Use it everyday. Sometimes to laminate, always to apply. Works fantastic!! Held off for years because of the prices on all the others I saw. Then I found a killer deal and made it even better.

  16. Can't use CMYK files

    Anyone know the trick to print CMYK files from Signlab 9 to Versaworks / Roland? If the file goes from Signlab, it shows up black in Versaworks. If opened directly into Versaworks, it's fine. Something is happening in Signlab that I can't figure out. Any ideas? Thanks

  17. CMYK Problem with Signlab and Versaworks

    Anyone know the trick to print CMYK files from Signlab 9 to Versaworks / Roland? If the file goes from Signlab, it shows up black in Versaworks. If opened directly into Versaworks, it's fine. Something is happening in Signlab that I can't figure out. Any ideas? Thanks

  18. Flexi 8 with Windows 7

    Thanks all for the info. Wasn't sure if it was even possible. Sounds encouraging.

  19. Flexi 8 with Windows 7

    I understand Flexi 8 can only be used with Windows XP. Has anyone used it with Windows 7? Thanks for any info.

  20. Render to Bitmap Too Saturated

    In Signlab 9, when I render to bitmap (jpg) proofs are too bright and saturated. Anyone know of a setting to tone it down a bit? Thanks for any suggestions.

  21. Blade Pressure for Roland

    What Blade Pressure under Cut Controls for Roland VS540 VersaWorks are you using? Both for 3 mil and thicker 6 mil vinyl. Thanks
Top