Search results

Hi, I have update my versaworks 2.6 (everything worked fine perfectly print and cut).i have uninstall versaworks 2.6 to full install versaworks 4.0 but since I have done it I can't perform a test cut from versaworks (Printer-> Test Cut) and versaworks doesn't recognize cutcontour. I'm hearing...

you should not take this printer. VS ans RE roland printer use vertical cartridges and there is a variation of ink pressure in the printhead. a lot of my customers who get this printer would like to change there machine. to many problem due to those vertical cartridges. you should better choose...

Fine reply. If fibers touch the printhead, the ink moves under the head and the result is that the ink is no longer in front of nozzles. When the head try to print, the ink is not projeted verticaly and you obtain this kind of problem. there is another reason of this issue but this is one of them.

before to be place, damper have to be clean and fill with cleaning Solvent for this printer. if one of you damper is discharged try to fill it with solvent and try to do a strong cleaning. for the wiper, have you change you wiper with by an outlet one? sometimes outlet wiper are more rigid and...

check on digiprint supplies (web site). take care, there is 2 kind of DX2 printheads. color (3 channels) and black (2 channels).

You can try to test your printhead and slider board with a voltmeter. If you need help to do this, send me a mail and i will send you the process. I have already fix this process by changing the slider board but you need a voltmeter to know if this board is damaged. and you can also test your...

on your printer there is sub tank below cartridges and there are valves on the ink tube between sub tank and print head so it's difficult to know where the ink stops. you need the code to charge the ink for all colors. I don't know another way to do it.

the head could over spray if the ink doesn't come correctly to the head or if the head is damage (scratch) due to a paper jam for example.

it's certainly du to a defective chip on your cartridges. what is the firmware number? do you use OEM cartridges or not?

no, it's not necessary but you have to fix the head carriage with the blue metal block which is screw behind your printer. it avoid the printhead and cut carriage to slide over the printer during the move. unscrew the blue metal block and screw it next to the printhead and cut carriage.

isopropyl alcohol is not good with water. the miscibility of this alcohol is really bad with water! with dye ink you could block the channel. I'm chemist an technician for this kind of machine. in chemistry we use this alcohol to avoid water. if you try to clean your head with that you could...

Hello, is anyone have skills on the Roland "system switch" in the "service menu". I would like to get the system switch code for roland VS. somebody could help me? best regards Romichoux

I have one already used but it works well. if you want send me an mp.

you have to download the ICC profil which corresponds to your media. what printer do you use? Do you export your picture in CMYK and not in RGB?

Hello, I would like to change the ink type on a Roland VS serie. The machine is in 6 colors mode (CMYKLcLm) but when I go in the service menu>Ink type Change, I can only choose between Max6 (Ecosolmax 6 colors), PIG 4 (Pigment 4 colors) or UNKNOWN (not specified ink). How I can turn this...

Hi poppe try to check the printhead cable. When thoses cables are not correctly connected to the board, somtime the machine can't be switch on. that could also explain the miss of color.

Sorry i didn't see your post before but i think i know How to soluce this problem. Please do not swamp Ribbon cable on the board. The head could heat and you could damage it. If you want to swamp Ribbon swamp them on the board and on the head simultaneously. Of course when the printer is...

after changing an encoder you have to do the limit initialization and calibrate you encoder. otherwise it's normal to get this result. If you need help to do it let me know.

hi, I have solved this problem on a SP540V printer last week! Exactly the same problem. I my case that was due to the carriage board just above printheads. It's not expensive and really easy to change. It can also due to your ribbon cable from the carriage board to mother board. but generally...

Try to do this: -use a bag clip like this and pinch the pump tube (between the cap pin and the pump) http://www.kitchenaria.com/Kitchen/Gadgets/kitchenware_1393.html -when tube is pinch put cleaning solvent in the capping - replace the head on the capping with the solvent - wait 5 min and...