• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Epson 70670 and 70675 huge delays in printhead movement

    Ok here is the latest. I had a technician come out and the bushings for the carriage was dried up. So we took them out cleaned them and put new oil on the pads and used the grease Epson recommends on the side of the bushings that don't have the pad. Also replaced the carriage drive motor. This...
  2. Epson 70670 and 70675 huge delays in printhead movement

    We are Ripping images and then printing them. I thought I found the trouble a couple of days ago when I started looking at the file size and a 64"x48" banner was 880MB. Some how the ICC profile, which is a UltraFlex profile got changed to 720x720x1440 or something like that. I set it beck to...
  3. Epson 70670 and 70675 huge delays in printhead movement

    Ok this one is kicking my tail and about to drive me crazy. We are running two Epson Surecolors. One being a S70670 and the other S70675. The Rip Software we are using is Onyx Thrive. I am sending work to the printers from Onyx through our network. We are getting huge delays in movement of the...
  4. Epson Surecolor S70670 ICC Profile

    Hope everyone is doing well and printing with no problems. I have a question about which ICC Profile to use for a canvas material we are going to run on our Epson Surecolor S70670. The canvas material is 15 mil Acid free Stretch canvas made by intelicoat technologies. I went to their website and...
  5. Epson surecolor s70670 reviews please

    Ok lets start off by saying hello and hope everyone is having a good day! Well I was one of the lucky ones and got to go to Orlando Fl. for SGIA EXPO. I have to say I saw alot of neat printers down there. The one that caught my eye the most was the Epson Surecolor 70670. The prints looked...
  6. Hemmed Vinyl

    Hello to everyone and hope all is going well! I have a very simple question. Is there any other vinyl material out there besides Mutoh that is prehemmed and comes in 24", 36", and 48"? Any input would be greatly appreciated. Sincerely, kkell101
  7. Ink Cartridge Problems!!

    Hello to everyone and hope we are all having a good day!! I am having problems with the ink cartridges on my VJ1204 saying their out of ink when there is still ink in the cartridge. This does not seem to be happening with just one particular color. It is happening with them all. For example the...
  8. VJ1204 not printing any colors

    Ok! Just wanted to give an update. I have my Mutoh Valuejet 1204 printing like it was brand new. I'm a little disappointed in Mutoh's Tech Support or lack there of. But anyway I replaced all eight dampers and rebuilt the maintenance station. The problem I was having to where it was not printing...
  9. VJ1204 not printing any colors

    Ok! I found out the problem with printing and no ink being laid down. It did turn out that it was the cap assembly in which was a brand new one that I purchased. I put the old one back on and got ink flowing to the head and actually printing now. The only problem I'm having now and I have...
  10. VJ1204 not printing any colors

    Where are the F6 and F7 fuses located. I checked F2 fuse as stated in other postings and I'm pretty sure I checked all the other fuses, but I have been all over this thing so I really can't remember. Are they the soldered in types and if so what are their ratings. I appreciate the input. Also I...
  11. VJ1204 not printing any colors

    I don't see how it can be the capping assembly because the maintenance station when I remount the ms there are registers that it aligns too. When the head comes home it raises the maintenance station to where it needs to be. All the springs are in place. I have checked the F2 fuse on the...
  12. VJ1204 not printing any colors

    Hello and hope everyone is having a better day than I am. I took our VJ1204 down today for some much needed maintenance. This printer is about a 1 1/2 years old and we print alot of banners that have full coverage of ink. Had been noticing we had some clogged nozzles and when printing banners we...
  13. Service/Maintenance Manual for Valuejet 1204

    Hello! Hope everyone is having a wonderful day and all is going well. Does anyone know where I can get a service manual and maintenance manual for the Mutoh Valuejet 1204 printer. I work for a photo lab that has purchased the Mutoh printer a little over a year ago and we are fixing to get into...
Top