Search results

Thank you for the replies - might try it with some plastic to reduce possibility of head damage in case of clumsiness!

Definately out side to side, but will have to check front/rear also. will have a measure, sure they are currently higher than 2mm

Hi all, I have a second user Sp300v that I bought - It was either going to end up as spares or repair. Mostly it has turned out OK, but it has some overspray on the black ink. The previous owner claimed to have had the heads changed by an engineer (which I do not believe). The screws on...

Thats fantastic - I had never looked at either of those and better than what I had found, at least i can plan ahead now, Thank you both very much, Will

Hi all, hopefully you can help me - I am off to Las Vegas for a couple of weeks, and travelling around for a while whilst there, I could really do with mobile internet access on my tablet. Over here in the UK I know what we can get, but dont know the American market. Can you get such a thing...

Ours went the same - I switched on the machine with the Black/Cyan cable unplugged by accident, this was enough to blow the fuse on the board. Our engineer changed the fuse but its easy if you are technically minded (and brave enough) If you can locate the fuses on the board, with a meter...

Thanks - I will defiantly flush the inks - this could have turned out to be a horror story. The printer does in fact have two new heads, and the magenta started deflecting a little after two weeks, but was ok after a clean. I'm taking no chances so this ink is coming out asap. To be fair...

Hi there, after advice from our engineer (and a new set of heads) we are switching to eco-sol max. It also appears as though the magenta may be 'bad ink' The colorific literature says that it compatible, and than it can be used without flushing when switching from eco-sol - but in reverse...

just bought mine from here : www.digiprint-supplies.com/ not checked if the deliver to US but they are the real deal

Don't tempt me! Staying with friends in Vancouver, I just know my partner will want to stay!

Hi all, just read the thread on 82R909's issues which are exactly the same as mine... the machine is getting on so I have new heads and dampers here are ready for an engineer to put in. But here is my dilemma..... I am going to Canada for 3 weeks in August..... I do not want to struggle on...

take it thats .250 and not 250?!

I'll try that one on the next person that asks me....! Now blasted machine is playing up, first time in years grrrrr :Oops:

Hi there, not this year - with the olympics (lots of restrictions) i think we are only going as far south as Linslade on the Grand Union - although this may change as we are awaiting some info on the Regents canal 200 year celebration event in which case we may get permits. Watch this space...

The heads are a bit tired on my SP300, and I'm in Vancouver staying with friends in August/September, and possibly across to the US, so might it be worth picking them up whilst i'm that side of the pond? (if they are cheaper?) Whats the going rate at the moment - any recommendations of...

I have to print fairly high quality on mine not to get it to 'band' - but then i do know know the heads are quite tired. Could be a number of things but not acceptable print quality.

Hi all, I have been using my sp300 (cadet) for 3-4 years now and have stuck to one or two profiles and and a high quality setting. What dpi settings work best for other people in colorip whilst giving acceptable results?

Hi all, would agree with most of above - moved our cadet in a van - secured head, unscrewed wasted/plugged - if it is rigid type or hard suspension, will need plenty of protection underneath to iron out the jolts.

Thanks all for the kind replies! Been doing this on the boat for four years, started out with a PC60 and made room for the cadet as things grew after 6 months - these boats are 6ft wide and 58ft wide, so it's tight (oh and we live on it!) The cadet is very tolerant, not sure how other machines...

Here it goes! I've had to put them on as links as didnt have the direct urls.... but here is the proof! https://picasaweb.google.com/lh/photo/ONRY1PUzBfOeSeR_zUY2fdMTjNZETYmyPJy0liipFm0?feat=directlink...