• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Roland vs 640 Ink Configuration

    changing roland vs-640 metalic to dual cmyk at last did manage to covert vs-640 metalic to dual cmyk. you dont need the service manual to do it, but you have to enter the service mode to change the ink type, you will find three option, metalic, pigment 4 colour and unknown. this is where...

  3. Cj-500 issues

    i think there must be something wrong with the power supply, replacing the fuse will not fix the problem there must be a component that is faulty.

  4. Roland XJ - linear encoder sensor?

    well just check at unit that holds the media cutter/knife. it has screws that attaches it to the head carriage. it is located under this unit you can easily see the sensor cable running to it. there are to ways of cleaning it, fast make sure you printer is powered off, using the head unlocking...
  5.

    Linear calibration Roland VP540?

    linear calibration vp 540 well i think this error that occur to all printer that have encoder strip, it has noting to do with the head replacement. all you have to do is clean the encoder strip and the encoder reader. the encoder reader is located on the carriage unit,and you have to remove...

  6. roland sp 540 mainboard

    got a Roland sp 540v, which blown the main board. i got a new replacement the board and now when i send the firmware the printer receives and install when it is completed it prompts me to switch off, which i did , but it does not come on when switch it on. any ideas ? thanks Steve
Top