I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Thanks guys that is exactly what it was. I got in there and cleaned the whole carriage now its all good. If any one needs the service manual for this printer let me know I have it.
Hey guys I just picked up a nice used L25500. I have been playing with it setting profiles and all that fun stuff. I just replaced the yellow/black printheads because the black was having problems. I am now getting lines like the printheads are dragging or something but I know that they aren't...
Hey guys I am running the Triangle JVS inks right now and I am having a wicked cyan overspray that I cannot get fixed. Anyone else using 3rd party inks having this problem?
I would change back the encoder strip and start checking the dampers, manifolds, and lines. I just had one of my Black lines break in the carridge out of no where the other day. I still have the top of my machine apart just to keep an eye on things.
Try swapping the cables from the black to the magenta and try a test draw to confirm. I have had that happen and it ended up being the head cables being worn. But that does look like a nasty crease. I have a few parts printers if you need any parts.
If you have onxy you can dual boot use the drivers from your set up disc thats how I print with mine I used an older macbook it runs onyx better than most PC's ever have for me.
Alright well I have it printing great in uni-directional. This will work for awhile till I can figure out the bi-directional. Still any input would be great. Thanks!
Ok guys I took all the heads out and adjusted all the base plates on the head so they are as close to each other as physically possible... It helped. Then I did the y base, then went through the print adjust in maintenance mode, then the print adjust is the standard mode and I cleaned the...
Hey Guys,
I have done everything that is in all the manuals about fixing slant and adjusting the Y-base going through the print adjust I have changed all the values and I am still getting this. I have to be missing something. If you know I would really appreciate it...
I have set up my mimaki and I was printing some things out of onyx and I had is at 720 varidot 8 pass bi-directional but when it started printing it would say 720x720 but what what printing was like 360x360 4 pass uni-directional. It's a new printer to me so I'm unsure what I'm missing any help...
My JV3 is dropping color after sitting. I put new capping tops on all the heads tried changing to the bigger dampers on one to test. No change. If I go into the #parameter check pattern and do a 720x720 100% on all the colors individually then go back and do a test print its almost all ok then...
Hey guys just picked this printer up cleaned it all out someone let it sit. I cleaned all the heads recovered 3 put a new one in. Got it all running did a few test draws to make sure I got all the ink into the dampers. Now it wont do a test draw or print. Just stopped any ideas?
Same Problem
I am having the same problem. I brought back a JV3-160SP back from the dead. New everything pretty much. 3 recovered printheads and 1 new one. I get no errors. I try to test print and I get nothing. Not even in the #test check pattern. I got my new head to do it once at 25% and...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.