Search results

If you still have wasatch product, try the 1624 or 1624W driver it should work fine. Also if you are having banding as said before do the PF adjustment and you will be fine.

Sent via PM. Thanks!

May i ask what is needed for? i'll send it tomorrow when im back at work via PM. thanks in advance.

VanderJ, Thanks for the fast reply. I know this are great machines , i have 2xrj900 , 2x1624 and 2x1638.. But this one have been a pain in the ** not because the machine but because of the distributors, to be honest. Its nice to hear that the only code i've to put in is the ink code (i can ask...

i have 2 of this machines, and taking out the printhead in RJ900X its pretty easy, there are no screws holding it except for all that plastic things on top of it. As i can se you've already taken the weight away you must put that again for future working if not the carriage is very light and...

Hello guys, thanks for all the tips and advice in advance. Here is the situation. My mutoh 1638WX had an ink leakege from the spitting box going down all the way to the mainboard with only 3 months of use. We are using J-teck Italian inks for sublimation. The problem here is that we've called...

JV33 uses Chip System So Check if Ink type is same (SS1, SB53, SS21 ,etc) Settings in machine and cartridge chip. I've never seen any JV33 where Chip system must be repaired so its most probably Chip issue(catridge problem). What config are you running, CMYKx2 ?CMYKLCLM? have you tried this...

Same as other said above it would be nice if we could get a closer picture of the passes.. Possible Media Issues 1) Check how and where you storage the media rolls. 2) Check humidity and temp of the room where is beeing printed 3) Try to storage a few rolls of each media & Ink inside the...

Hey Guys, Ihave 2 VJ 1624W and im old Mimaki user... so i was wonder if any of you have the VJ1624 service manual, im having damper issues and can seem to open the dx7 printhead to check how are they and if need to change or charge them... im having ink startvation issues in black head and dont...

no, anyway jv33 will realize if list can fit in the media or not...

Dont know why i cant edit my post. Here is the right steps. On Local mode. Function => Information => List. Bye!

+1 Ink Load. Also, looking between passes below the big printed area, it doesnt look like banding issue for me. Actually looks like if printhead was scratched and nozzles are firing wrong..(not in straight line).

this happened to me while using paper and it wasnt able to align it right both sides. Make sure of this, if you cant correct the banding issue, and you have Negative banding (white line) in one of the sides.

well, actually,when using a bulk system is pretty easy, i print 24 hrs for 7 straight days for example,(300 mts x 1.6 witdht per day ,around 8, 830 hours each), i always keep bulksystem full. Im using Inktec's 600ml per color (CCMMYYKK) so its 1,2 liters per color while using dual slot. If you...

the name for this is "LIST", and you need like A3 size to print it... You dont need to use service mode, just go to maintance and select "LIST".

Hey everyone, A Mutoh 1624 (Dx7 printhead) just came in... im using wasatch with it, and printing in 360x360 dpi 1 pass. making a stunning 160 mts2 per 3 hours!!!. So my life changed a bit, making my life easier for the moment. having 8 hours jobs transformed in 3 hours. So, i said lets...

If not solved, x2 encoder strip 2)Check if you have drops in the printhead. printhead must be clean. 3)Check if you have drops in the printhead road, specially the paper security clamps. if not solved make CMYK squares and post a pick with a nozzle check.

have you checked encoder strip? because that looks like wrong information going to the printhead... check it via service menu, encoder strip.. check all values must be alphanumeric data and not 0000.

Actually im having the same issue.-- Check Encoder strip first. also make a testdraw and post it. because my problem is that nozzles are firing wrong.... some are clogged or have ink inside of printhead... also it would be nice to see a banding test, this will show if nozzle are 100% aligned.

now checked on the machine, here is the right direction: Function => maintenance => Sleep Setup => Refresh / Pump Tube Wash / Cleaning. Sorry for bad directions just wasnt next to the machine that time... Also to know how to use all properties and the button flow is, check jv33 manual last...