• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. JV 33 color not firing

    the jv33 has a dx5 head with the dampers fitting onto the manifold with the silver clips connected to the two outside (magenta) dampers on 1 and 8. this affects the seating on the dampers when the manifold has ink on it.

  3. JV 33 color not firing

    jv33 color not firing If your problem has not been resolved. Remove the 2 silver clips that fit across the 8 dampers and try it like that. with the clips on it affects the damper seating on the 2 outside dampers. This helped resolve my issue.

  4. jv3 130sp dead

    If you can remove the power supply, check for the startup resistors linked to the big capacitors. One of them has probably gone open circuit, this will prevent the power supply from starting up.
  5.

    Newbie: Ghost-Picture on JV33-260, Rasterlink

    jv 33 alignment After you do the service mode adjustment, you must switch off the printer and start up again. Then go to maintainance and do the drop pos adjustment.
  6.

    problem printing test -CJV30 160-

    If your damper has blistered, it will cause ink drops while printing
  7.

    problem printing test -CJV30 160-

    If your dampers have blistered it will cause ink drops onto the print.
Top