Search results

Have you consider the initial charge waste of the printer?the inkline was empty before it was installed,there is a 100ml subtank which is also empty.during the initial charge you have to fill the inkline and the subtank plus the extra ink suck by the capping unit.

Try to create your own icc profile for that specific material,your ink maybe too much.

I have here the ink cost study from mutoh japan, 360 x 720 is 7.29ml per sq.meter The rip they use is photoprint 10

Ink charge is in the features of the printer.it does the automatic cleaning of the printhead.longer than the normal cleaning.i suggest do the nozzle check first on the diagnosis mode before you perform ink charge.

Your black seems to have a lot of nozzles misfires,you cannot see it on the nozzle check on the normal mode, you check it on the diagnosis mode. 1. Before pressing the power on the up,down and right key,press it until the initializing is finished. 2. Use the left and right arrow key to...

Remove the left cover,you will see the capping unit,try to pull down the lower part of the capping unit below the suction area.

The pros of latex is you have a wider range of materials you print on,leather canvas,backlit,uncoated paper,the cons are you have to spend more on power consumption,more time on setting up the like warming up and time of changing of media. With eco solvent like mutoh,you are limited only to...