• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Amazon vehicle wrap color

    Hi. Looking to wrap a box truck with color that matches Amazon’s vehicle. Do any of the wrap makers have that color already? I would rather buy than print it I’m talking about that bluish gray color, not the light blue in their logo. Thanks D
  2. Thinking about buying Graphtec FC8600-130

    One thing, my previous employer is selling it. I know that the cutter is in a great condition, a workhorse. Is $3800 too much? I attached their listing from DigitSm.. Try to bring the price down a bit? New one is $6400, so this seems like a decent deal. Thanks
  3. HP L330 DNS settings

    Looking to fix an issue with my HP L330 not connecting to the internet. It seems that DNS settings were messed up. I am able to send stuff to be printed, network connection is OK. Only issue is that I can not connect to the internet do download profiles and firmware update. Anyone had or has...
  4. Suggestions 5d Or 4d Carbon Source

    Looking for a source of a good 4D or a 5D carbon. One of my customers wants to wrap fenders of his Ford Raptor with it. I have not seen a 4D or 5D sold anywhere but the ebay or Amazon and I do not really want to take a chance.
  5. What Are You Guys Jamming To Latelly

    Lately, back to the late 90's and early 2000's. Been hooked to Godsmack last few feeks. It is a cover, but love tis version of the song. What about you guys, what is your drug (music) of choice??
  6. Opinion Lamination roll size

    Just wandering if manufacturers should make lamination rolls the same size as the print vinyl (As they do right now, .25" smaller or a .5" smaller? Stuff happens, your printed vinyl wound uneven and it will weave, you did not align it right with a lamination when laminating, or whatever the...
  7. Need Help Printing t-shirt transfers on HP L330???

    Hi peoples. I used to print transfers on Siser material with HP Photorealistic-LowTemperature Substrate setting on my old HP L25500. Now, on the 330 it seams that that preset/profile is gone. I was wandering what everyone else is using for transfer print. I tried Generic paper and lowered the...
  8. Baffled with door handles.

    OK, I'm a bit confused. Wrapped my cars driver side (2015 Ford Flex). Took the driver side door handles off. No problem, wrap went on without a problem. Now onto the passenger side. Went to take the door handles off....no-go. WTH??? Loosen up the screw, pull on the door handle. Nothing! Driver...
  9. CM3 and Adobe CC 2017 Not working together

    In case you did not see the notification from one of your distributors, if you have a Graphtec cutter and using Cutting Master 3, do not update to new Adobe Illustrator CC 2017 version. It will not work with CM3 I guess Graphtec is working on it, how fast they do stuff, we can expect an update...
  10. Dodge Promaster City wrapped with new Avery

    Just finished wrapping this one with new Avery 1105/1360Z combo. All printed on my new HP330. Did not notice any issues with printing and not really any noticeable color shift between the panels. Used the doors as a natural seams, I had to seam it towards the bottom a bit due to printing on 54"...
  11. Found this video

    Found this video and thought that it is pretty funny and appropriate for this time of the year. sorry if someone gets offended :( https://www.youtube.com/watch?v=ceS_jkKjIgo
  12. Project just finished (Boxtruck wrap)

    Just finished this project. Design, print (HP L330) and install. My first full coverage boxtruck. Decided to do horizontal seem to minimize number of seems. I know I should have done bottom one first not to have seem open on top, but I used edge seal tape (half width) to close the seam for...
  13. Box truck wrap intall question

    Looking to do my first full coverage wrap on a ford box truck. I was informed that the box has fiberglass sides with a very small texture. Will I be OK using Avery 1105 RS EZ? Or I could go even cheaper with Oracal 3651 RA because it is flat? Will the vinyl stick properly to the fiberglass? I...
  14. Any suggestions on a 220V USB

    Recently, I purchased new L330 and with recent storms and power outages, I wanted to see if there are battery back-ups available for these printers. I have seen some that are $100-$200, but also some that are few thousands. I would not mind spending 2-3 hundred for it. Is there someone using...
  15. First time print/cut perf material issues

    Yesterday was the first time I printed and cut the perf material. At first, I had issues scanning it but that was fixed after I adjusted the sensitivity of Graphtec ARMS scanner. After the first scan was completed, it started cutting at least .5" off. I printed another print, about 28" square...
  16. Exciting time!

    Old printer is getting picked up on Friday by a fellow forum member (HP L25500) and new week Friday new L330 is getting installed. Glad I bought used L25500 to test the Latex waters. Still running great and with no issues, but I could not pass up on the new HP deal this month. Wish I could...
  17. HP L25500 Latex wide format printer for sale

    http://cleveland.craigslist.org/bfs/5683499760.html Asking $3500 OBO. More info on Craigslist link Pick up only. Youtube video https://www.youtube.com/watch?v=oQ0dHfdDElU&feature=youtu.be
  18. Does anyone have profile for new MPI 1105 for L25500

    Hi. Does anyone have a profile and it is willing to share for MPI 1105 series for L25500 and Flexi? Avery does not have it for download on their website. Thank you
  19. Looking for a tech for Versa UV LEC-300 printer in Cleveland Ohio area

    As I said it in the title, I'm looking for a tech for Versa UV LEC-300 printer in Cleveland Ohio area. Looking for a friend of mine. The printer is printing white and magenta only. Everything else is lost, printer is not used every day and it used to prints mock-ups for a packaging company...
  20. Wrapped vehicles, do we need to report a color change to DMV?

    Just finishing my wife's vehicle. Wrapping it with Orafol 970RA Aubergine bronze. DO we have to report the color change to the DMV? Or that is not something that needs to be done? In case driver is stopped by the police, would they question discrepancies in the registration paperwork (Different...
Top