• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Z

    I seend that you have recieved the Stylus Pro 11880 service manual some years ago... I'm in...

    I seend that you have recieved the Stylus Pro 11880 service manual some years ago... I'm in trouble with it can you please help me
  2. Z

    Hello

    Hello
  3. Looking for FJ-50 and CJ-540 Service Manuals

    you got it or still need it? let me know
  4. Very large run of 2” round stickers/labels help

    Oursource it. You need Flexigraphic tech on this, They use UV inks, do not need lamination for short therm aplication. The product price should not be more than 50% of your inkjet costs (vinyl + lamination+ ink) Smaller runs should be around 1,5 usd/sqm with diecut included
  5. Need Help VP-540i cut is off & inconsistent

    Original ink or 3rd party or CIS sistem?
  6. Need Help VP-540i cut is off & inconsistent

    If you use 3rd party inks and cartridge setting is set to continue if empty, you can have this issue . I know because I had this issue, is some kind of protection to nuy OEM inks. You have to have at least 1 cartridge with up to date Chip inside, othervise your cutting goes out missaligned. This...
  7. Need Help VP-540i cut is off & inconsistent

    You probably use a CIS that has expired or empty chips. You should check the ink carts maybe they are “empty” on the chip side. At least take out and reinsert the carts, but better put at least one new cart/chip inside and try a smaller print. If you use orriginal inks, and your carts are fresh...
  8. Software Help Roland VS/SP/GR user. Looking for an open source alternative for VW

    In Media Explorer make a copy of your media or create a new media, and edit the lowest quality mode and put the feed speed on maximum. 50mm/s instead of 10mm/s this might help for beginning.
  9. Z

    The capping motor has some issue, check if there is nothing in the way of the capping system

    The capping motor has some issue, check if there is nothing in the way of the capping system
  10. VP-540 prints are spongy/grainy

    Did you adjust the Bi Directional setting in the VP menu? The head height can be a reason also. Try to print Unidir instead of bidirectional from Versa.
  11. Roland SP-540V Horizontal Banding Issue

    Feed calibration? if not than Dampers for sure, also check the cartriges if all good, the head doesn't gets the ink needed for full print, or the cable to the head is damaged, but also looks like the head is dying slowly. it's an old prinhead? Try other color tones to print so you can be sure...
  12. Roland GR-540 makes noise when should be quiet

    Maybe the vacuum system or some fans needs to be cleaned of dust inside the mchine?
  13. XR-640 is out of Warranty - should I switch to 3rd party inks?

    Switch only if you print a lot on the printer, otherwise all bad. You have to have quantities and to print at least on daily basis. 3rd party Inks with CIS are more likely to dry / clog than cartridge solution. If you print at least 5 liters of ink (all colors) / month the swich to 3rd CIS is ok.
  14. Z

    Stickering

    Stickering
Top