Search results

Where do you guys get your ink for mutoh falcon printers? Does any one use the bulk ink or refill systems? I have been getting it from signwarehouse but I was interested in buying the bulk ink and refilling.

I think a lot of guys use oracal 3165 with 210 lam.

Thanks for the replies. I am using flexisign for my design and rip software as I stated in the original post and as for the 30" material i figured it would provide the least amount of waste since the sides of most dirt late models are not taller than 29 inches. I was thinking of just drawing a...

This will be my first attempt at printing and layout of a full race car wrap. I have mainly been doing signs, number, sponsors, logos, and decals and have wrapped a go-kart and a few other small things but now I am about to do first full size race car. I have installed them for years so that...

Thanks for your help. I took everything back apart, cleaned, and then oiled all the rollers and bearings. I also swapped ends of the encoder strip and now everything is working great again. Not sure if it was the strip or cleaning and oiling but all is good again. Thanks for your help.

I saw that hole like for the one on the back but I removed the cover and there is no sensor there. I got everything back working and it is sensing the paper correctly so I guess I am not gonna worry about it. Thanks for the pic though

No i cannot feel any resistance where it is stopping and when the machine is off and I move it along the raceway i feel nothing. When the machine is running it is barely hitting something right at the edge of the paper. It never stops there but is driving me crazy. Took the whole carriage off...

Getting a E072 Y Timeout error when trying to do a nossle check. It prints the first line of test and then comes back to the carriage, then goes back and prints the first past of the second test (Diagonal lines) and as it is about to come out of the capping station it stops and then i get this...

I cant get the sensor to register right in the diag menu but the issue was that is was set for sheet feed instead of roll. I fixed that and now I have a E072 error. I had this once before when i first got the machine but i cleaned the encoder strip and reader and it went away. During the...

Does anyone know where the xf sensor is located on a falcon outdoor? When I turn on the machine just after it initializes it starts feeding paper out and wont stop. I logged into the diag menu to check the sensors and the xr sensor works properly but i cannot find the xf sensor to test. Also...