Search results

We're having significant problems with HP prepasted lining up the design/image with it lately. We print and cut 25" panels and when lining up over the last 3 months and with design with lots of diagonal lines they aren't lining up great. Upon review, it looks like the length changes quite...

Hey guys, I'm in the market for a second printer. I've been printing off the Roland XR640. Just recently we had a crap ton of problems with it all at once and we were down and out for 2 weeks. The shop can't afford to be down that long again so we're in the market for a backup printer. I think...

Hey everyone, So we are looking to get a backup wiper for when we need it. I've read about using the white Mimaki wipers as they last longer? We have a XR640 Pro 4. Any input would be greatly appreciated. :) prosigner

Hey guys, So we were comparing two canvases on our Pro4 the other day. One 17mil on Low Head Height and one 21mil on High Head Height (scared of headstrikes) but we are thinking the high head height might have put the thicker material at a disadvantage. At what thickness of material do you...

Hey everyone, We are looking at these two canvases. Currently we use Neschen. We want a Matte.. we checked out the PureG Urth but didn't fall in love with it, especially with a Satin finish. Anyone have any experiences with these Sihl canvases? How do they compare to Picasso (which I have...

Hey guys, So we are looking for a good application tape roller. We are looking for a 60-64" roller. We like this one so far. http://shop2012.yellotools.us/Applying/Applying/Appfix::42.html Does anyone else have any other recommendations or is this the way to go? Thanks in advance!

Hey everyone, Just wanted to say first off thanks so much for all the help we have gotten on this forum, everyone here has been great! I hope to be able to contribute soon in the future, but at this point much of the signs stuff that gets posted here is above our current knowledge! I'm...

Hey guys, So we are doing a commercial wallpaper project for a couple stores that are being built.. we use some In-House Wallpaper material from our distributor that we like, but it does not have any certifications, fire retardant, mold resistant, smoke resistant, etc.. Should we be worried...

Hey everyone, We are looking for a 64" Canvas. We are currently using Neschen Monet Canvas, but they only offer 60 inch rolls. Can anyone recommend a supplier in Canada that can offer 64" or a brand that you could recommend? Thanks! :) prosigner

Hey guys, We are using Rite-Media Matte Paper, MuralTex, and Premask. We are also using Neschen Monet Canvas. The Premask was dissapointing to say the least. The paper has been pretty good, looks good anyways. MuralTex has been good but we are looking elsewhere for a big potential commercial...

Hey guys, We have been using our printer for about ~3 months and we have had some ink droplet problems on the prints so have probably done more manual cleans than should have been needed, but we haven't had any problems for a while. However, we have already run out of our cleaning solution...

Hey everyone, We have been doing some wallpaper prints on MuralTex Removeable Fabric but we are looking at a more regular wallpaper media. Is HP PVC Free Wallpaper the way to go? Or Dreamscape? We have a Roland XR-640 to print on. Which do you guys prefer? Heard the installation of HP is...

Hey everyone, We are looking at either shipping pre-stretched canvas or shipping the stretcher bars ready to assemble and weighing out our options. Is shipping pre-stretched canvas tough? It looks like it might be too much of a hassle so we are considering only shipping the bars ready to be...

Hey everyone, Have a bit of a newbie question for everyone if you guys don't mind! :banghead: We have medium tack premask that just isn't sticking to our decals. Do we need to be using high tack? Could temperature be making a huge difference? Would appreciate any input before we buy a new...

Hey everyone, So we have an XR-640 that is printing pinkish hues on any grays. Is this a damper issue? Would appreciate any help! :smile: Thanks, prosigner

Hey guys, So a customer wants a boat vinyl decal and we have some Orajet 3951 lying around. Don't have any experience with boat decals...do we just print it like a normal decal and they apply it as you would a wall decal? Thanks in advance! prosigner

Hey everyone! So we are working with some images around 6500x4500 plus or minus 1000px each way that are going to be viewed up pretty close, wanting to be able to resize them to about 100" x 140". We are using Perfect Resize to resize to the desired size at 100ppi and then using High Pass on PS...

Hey everyone, We are using the newest version of Versaworks and are having troubles with a few picky files, large files, but not over 500mb. They are from Wikipedia so I don't think they are corrupt. Is there anything I can do about this to address this issue? Thanks in advance, prosigner

Hey everyone, Hope you are all doing well! :) We are in the process of adding photos to our site and are trying to figure out if people look for sizes that will fit into frame sizes generally. Mainly, if there is a list of common frame sizes that we should be going by for our main sizes (we...

Hey guys! I was recently printing a large print on my Roland XR-640 and as it was finishing up the print I loaded another to queue and versaworks crashed. Now I have a almost completed print that I'm trying to save. The printer says "now processing" but it's no longer finishing up the print. Is...