• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. my print head keeps lifting the screens out of the capping station

    yes, change the caps Mikepro is correct. Regards www.chipemulator.com
  2. Head-1. Eeprom check

    Are you using original heads in your machine? Did you update firmware prior to error? Error can be caused by bad connection betwen slider board and head. regards www.chipemulator.com
  3. Rasterlink

    Rasterlink pro SG 4 supports Jv33 regards www.chipemulator.com
  4. JV3 cartridge chips

    you can buy it in Europe. regards www.chipemulator.com
  5. cjv magenta dying out while printing

    are you using original ink? any bulk system?? regards www.chipemulator.com
  6. UJF-3042HG Gloss Help

    Varnish is good in small áreas. in large áreas like your job, it´s a nightmare to do better than the photo. why you dont use a Varnish in spray? it´s 100 times cheaper :) regards www.chipemulator.com
  7. DX7 printhead

    Dont worry about DX5, Epson have agreemants with Mutoh,Rolland and Mimaki and they will produce DX5 heads for at least 4-5 years. Anyone remembers Mimaki JV2?? Producion was stopped about 10 years ago and just this year mimaki said: "we dont have more printheads for Jv2" regards...
  8. New model?

    If you want to change you Jv33, you can buy JV34. It is a work-horse too. If you want more speed go to TS5-160. If you want more and more you can goto TS500. But to be honest, JV33 is the best. Buy a second, or a third machine...and put 3,4,5 JV33 printing at same time...
  9. mimaki jv3-75sp2 help please

    Yes, Probably you have bad sealing betwen cap and head. Regards www.chipemulator.com
  10. Mimaki Head error 007

    Your heads seem to be ok. Probably you have slider pcb or mainpcb damaged. The only way to confirm it is replacing it. regards www.chipemulator.com
  11. JV5 320S goes into Local after every panel

    Probably your ink is expired and machine will turns to Local mode after every job. Regards www.chipemulator.com
  12. JV3 message error 07 head -------*

    It seems that your heads are ok! Probably you have slider board or main board damaged. The only way to test is changing it by new one! first is better to change slider. regards www.chipemulator.com
  13. Mimaki jv3-160 sp, printing awful

    What is the resolution / number of passes? regards www.chipemulator.com
  14. JV3 Printing black streaks

    Check head flat cables. If there is any bad connection you can have this problem. In last case change head by new one. regards www.chipemulator.com
  15. having trouble printing in 4 pass bi

    Hello You first picture dated 17/3/2013 apparently shows that machine changes from 4 passes to 2 passes on the middle of job (The LCD still showing 4P) That problem is extremelly rare but is possible and It´s related with Linear encoder. All the other pictures are showing problems with...
  16. Mimaki UJF3042

    yes, in UJF3042 must be in maintenance mode. 1- power off machine 2- press remote+function at same time during boot period 3- look on menus change date/time you can only roolback 8 hours each time regards
  17. error 16 MRL Command JV33

    when your machine stop, the LCD screen is blinking? any error? regards
  18. cjv30-160 trouble in spoolservice win7

    i have no experience with Wasatch... please e-mail wasatch, they must help for sure..
  19. JV3 and triangle bulk ink

    Your problem is very common on this days with some type of reseters :) The problem is that some chip reseters manufacturers are making their chips based in mimaki original chips, and the expire date of original source chip was 6-3-2013.. now you must roolback internal date of printer or buy...
  20. JV3-75 spII - Set a Cartridge - HELP

    the explanation of Klassicgrafix correctThe Ink Type Change for JV3 SHUT DOWN the JV3 PRESS key "<" ">" AT THE SAME TIME when OPEN THE DEVICE When the device ready, PRESS KEY "END" 1 time. Enter into into menu"SYSTEM PARAMETRE" Choose and enter"Ink 1 parametre". Look for Item 93 and change the...
Top