Search results

Hi is it possible to rebrand (via firmware e.g.) an OCE 9160 to Valuejet 1614? Sincerely yours, Michael

Hi guys Is it possible to change the (defective) mobo from My Falcon 2 64" with a Spitfire mobo 64"? In My Falcon, when rip while print, Printer is only Taking Data very very Slow via Ethernet. (Checking via task Manager in windows, Printer is the only device on the Switch - Same Thing Using...

As I wrote somewhere in the forum, i had the problem when printing with "Write mode OFF", the printer frequently stopped while printing, waiting for more data. Now, i changed the DIMM on the network card with a 256MB Standard 168pin, PC133 DIMM single sided (rarely to find on ebay) - WORKED...

Hi Guys, new problem i remembered: Using colorgate 7.0 - Printing to the Rockhopper II all the prints looking fine. After using Write mode "write.print" or "write>print" the prints looking worse, text isn't fine anymore - it looks like the two black heads are not aligned. BUT ONLY when using...

Hi there, is my Head 2 C/M also dead? History: I changed the head 1 C/M having heavily deflected nozzles. Aligned all, printed pretty well afterwards. Went to noon, came back, tried again a print - here is what i got: heavily deflected nozzles. Here is a nozzle check of the second head - is...

Hi guys, the new head is here. Also the Maintenance manual. Are there any special things to know, making the change easier? E.G. alignment of the mounting plate on the head etc... Yours, Mike

Hi Guys, I am printing on an Rockhopper II in Germany (just started with, before, printed on Roland printers) Now i did a search a was brought to a menu (rem update, card update). In there, i pressed Cancel, and then rebootet machine. Now, the mutoh doesnt have a heater system anymore (as...

Hi guys, searching how to align the caps on the head. Is there any menu in the service menu? Can't find anything in maintenance manual. Please help. Also having bad haze on the prints.

Secand problem on my RHII (Falcon Outdoor II): Doing a nozzle check - almost all nozzles are present (3-4 are sometimes missing) BUT: In the "2" section where the yellow nozzles are shown (7th pattern of right side),on the upper 2 lines are black lines. Also having magenta and cyan sprays...

Hi guys, Rockhopper II is the same as Falcon Outdoor II. i have problems printing on vinyls. Between the paper rollers are some "bumps" which are not pulled down by vacuum in the head-area. So there is vertical banding on the prints. Is there too much pressure on the rolls of the lever...

Hi there, just bought a used RHII64 in working condition (have seen it). Transported it to my cellar. now E081 on Startup. Looked inside and saw a (almost) broken sensor for Cap unit. While putting it out, it died comlpletly. I think, the solvent ink dropped on the sensor killed it...