• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Question Feather flag pole pocket - Material

    Looking for a source for feather flag border that holds the pole I found Seattle Fabrics but it is only 1.5 inches Anyone have info on maybe a 2" opening - 4" folded?
  2. Question Mutoh RJ-900X Does FlexiSign support this model? Any experience

    Mutoh RJ-900X Does FlexiSign support this model? Any experience? SAI says RJ-900 but does not list the RJ-900X
  3. Question Flexi 12 files to be opened in Flexi 10

    Is it Possible to open a Flexi 12 file in Flexi 10? If so how as I haven't found a way to do so as it just shows up blank on the screen. thanks
  4. bx font to ttf

    Anybody know how to convert ttf to bx type font which is an embroidery font?
  5. Bulk ink for Mutoh model 1618

    I am looking for someone who has a Mutoh model 1618 duel head that had used the 1 liter OEM bags of ink. If that person has converted to a bulk ink system so they could use third party ink and could tell me what hardware has worked well for them I would appreciate this info. So if this is you...
  6. Flexi job tabs across the top

    I was watching a seasoned flexi user having several jobs open and his tabs were across the top just like you can see in Photoshop. I have not been able to recreate this. Any ideas which setting causes this to happen?
  7. Production Manager wont increase the font size on printout label

    Flexi 12 production manager I have tried to increase font size of the label that is printed under the printout. No mater what size I increase it to it stays so small you cant read it. Any thoughts?
  8. Mutoh maintenance engineer

    Anybody have an English Version of "Mutoh maintenance engineer" that you can send me? Or a valid link on where I can download. Thanks -James-
  9. 1604 with 1614 firmware. Is it Okay?

    I took possession of a used Mutoh 1604A. I notice that when you first turn it on the display states Mutoh 1614. My question is do they use the same firmware or what would be the reason someone would install 1614 software on a 1604 printer? Thanks for you comments. -James-
  10. Illustrator to Flexi gives multiple masks

    I have tried a search for this topic but not found a exact response. So here goes, sorry if it has been already covered. When I take an illustrator file that I have created and bring it into Flexi, I invariably get multiple masks added. Is there a way to select all masks in Flexi and in one foul...
  11. Free Two Outdoor Falcon Jr 38"

    Do you live in Tulsa Oklahoma area? Then I have a deal for you! FREE Two Mutoh Falcon Outdoor Jr. 38" Printers. Both were in good working condition in January of 2014. I had a heart attack & printers sat without being used since then. Most likely they have dried up heads. Haven't turned them on...
  12. How many fonts per sign or document?

    While duplicating a decal in AI, I realized that there are three different fonts used on this projects. In doing a search I haven't found out if there is a "Rule of Thumb" on how many fonts are acceptable to use in any one sign, document or decal for aesthetic purposes. What say you? -James-
  13. Un-interrupted Power Supply

    I am told brown outs voltage fluctuation are hazardous to the boards in the Roland printers. So is anybody using a uninterrupted power supply and if so what kind are you using? Ohm's law (amps X volts = watts) then 120 v X 4.5 amps should = 540 watts. Any thoughts? Roland SC-545EX -James-
  14. Manuals needed

    I just went from having a Mutoh outdoor Jr 38" to a Roland SC-545ex. This printer is so awesome. Now I need to get all the user and repair manuals. I had collected almost every Mutoh manual so that I could share with any of the 101 team. But now I get to start over and start collecting Rolland...
  15. Flexi production manager to be able to set up for Epson WF7010

    Any of the Flexi stock Epson print drivers that would be close enough to the WF 7010? I have an application where If I could set up Flexi to print cut to a wide format Epson model WF7010 using Ethernet and put Mutoh registration on the print cut file, my life (or rather my wife's life) would be...
  16. Anyone parting out a Outdoor Jr 38"

    I am in need of what has been referred to me as the "ink line stiffener". If you are parting out a Falcon Jr please see the enclosed picture from the parts diagram and let me know what you want for it. it is the aluminum strip that follows the ink lines as the head moves left to right.
  17. Space between black and cyan

    I just replaced a colored head in a Mutoh Falcon Jr. What adjustment do I make to close in the gap between the black and cyan on my nozzle test print. Blown up Pic enclosed.
  18. Falcon Jr Tiny verticle lines at 33" to 34"

    101rs My falcon Jr has had this problem since I bought it a few months ago. I needed a new color head so after I installed it two days ago, I am now striving for perfection. -Quit laughing- The head made the prints amazingly gorgeous but I still have these little black marks appearing...
  19. Ultrasonic – Opinion vrs Experience

    101ers I have seen it published – “Ultrasonic machines will ruin Epson Heads.” And also “I used a small ultrasonic machine and within a day my heads were back like new”. So now I need experience to balance out opinion. Have you used an ultrasonic machine on a DX2 or DX4 Epson head, and did...
  20. Baby Snot Sucker

    They say necessity is the mother of invention. Well my Mutoh falcon Jr got a plugged spit reservoir. I found a baby snot sucker in the medicine cabinet and thus I now have a tool to flushing out the reservoir drain tube. I filled the reservoir with cleaning solution and inserted the new tool...
Top