Search results

Ok guys, it’s been a while since I’ve posted here. Probably 2 years ago or more my Edge 2 randomly quit on me. It was a gently used printer that I ran some jobs on the first part of the week, then the end of that week it fired up and did everything like normal, but when it prints no foil...

I am looking to outsource several printed reflective car tag jobs. About 50 tags total. All artwork is done, I just really don't have time to deal with applying and trimming each tag. Does anyone do these wholesale?

I came in this morning and woke the printer up, and it was showing no inks were inserted (all of them were). I tried a restart, and also removing and reinserting all of the inks. It’s still showing no inks are inserted. Any ideas?

Does anyone know what happened to Vector Art? I use their website quite a bit and have purchased a ton of files from them. I went to it tonight and there is only one page that says "Vector Art products are out of print indefinitely". I ordered the 3 collections on CDs, I use it too much for it...

I searched, and this has been asked before. But almost all of the old links were dead. I have a lot of vector pinstriping from the Vector Mega Collection, but is there anything else out there? Most of what the Mega Collection has is just symmetrical center pieces but I need pieces to go around...

I finally ditched my L25500. I had a banding issue show up when trying to print Pantone 1405 brown, and after putting in all new inks and print heads and hours of testing I never could get it back right again. I found a used Latex 310 fairly close to me so I picked it up for what I think was a...

My L25500 is down and its looking like I may not be able to get it back going. I have been able to print a few jobs with it to keep things moving but I have one project that it won’t do correctly. I’m printing brown and gold on 3M 680CR for a police car. I am looking for someone with a Latex...

Ah the old L25500, I have a love hate relationship with it. Mostly hate though. So I have replaced just about every part of this printer. I know it’s time for a new one, but I’m trying to squeeze a couple more months out of it. Two days ago I printed a job on 3M 680CR that is only two colors...

So I am working on a new fire truck for a customer. We had the side and rear reflective striping done at the factory so it could be delivered NFPA compliant, and I am adding the gold leaf lettering and striping. I saw the truck for the first time today, and immediately noticed a problem. Our...

I have decided that it is time to replace my trusty L25500. I am going to stick with HP latex, and per the recommendations of many here I want to go with the 300 series. I have talked to the people at Plotter Masters/Plotter Depot and they have some good deals on refurbished HP printers and they...

I know the first gen Enduralam laminators are very old, but I got a very good deal on a 54”. I pulled the side covers off and the first thing I noticed was the roller lift had been cranked too far down and basically pushed the screw drive out of the back bearing. I have fixed all of that, but I...

I am selling my Graphtec CE5000-120. It has been used very little and is in excellent shape. Cut width is 48” and it does have the Graphtec contour cutting system. It comes with the factory stand, rollers, power and usb cords and a blade. Located in Harrisburg, NC. Asking $800 OBO

I have printed on black reflective in the past using my Edge and contour cut with the Envision plotter (works great). I’m wanting to try something different now though. I would like to print on 3M 680CR black reflective with my HP L25500 and then contour cut with my Summa plotter. I don’t see...

My old Edge has been running great, up until I got a new computer. The first time I loaded Flexi on the computer and ran the Edge everything was fine. The second time I had to fiddle with it for an hour to get it to print. Now I can’t get it to do anything. I only have two USB ports, but Flexi...

I recently got a new laptop and switched my Flexi software over to it. I copied all the files from my old computer and moved them over also. After a little bit of work I got my Edge and Envison working on the new setup. Today I printed a job on the Edge with no problems, but then when I tried to...

I have ran this one through the "Find my Font" software with no luck. I believe there is more than one font here, I have "Boink" which worked for the main logo, but the "Davidson" and the DOT numbers don't match. Any ideas?

Being that I do a lot of fire trucks, I do a lot of reflective striping. Normally they are either single color multi stripes, or printed multi color stripes. But every once in a while I get something like a 1-4-1 stripe that is two standard 3M reflective colors. For example, 1" gold- 1" gap- 4"...

I have a customer requesting screen printed 3M 680CR badges for their patrol cars. I do not screen print so I am hoping to find a Signs101 member to outsource to. The other part of this is screen printing vs. thermal printing... the customer says they want screen printed because they last...

I have a customer who found this artwork and wants it on their wrecker. I've done a lot of searching, and it seems like it is all over the internet everywhere from tshirt websites to desktop wallpaper sites, but I can't find the artwork anywhere. Has anyone seen this for sale or know of...

One of my customers called me today and told me they have an issue with a job I did six weeks ago. When he sent me the picture, I was stumped. I've never seen anything like this before... Notice the brown discoloration on the white striping on the rear cab door. He said the exact same...