I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
anyone know on VG print head compatibility? i got a generation 1 VG-540 serial Z showing printhead part #6000003390. that needs replaced. Local dealer says that part number #6000003976-1 should fit but doesn't guarantee it and i would hate to drop 1k on a printhead that i cant use. from my...
anyone know where i can purchase templates for display/product bins?
the idea would be to print them out on something like falconboard then cut and fold into the necessary shapes.
pulled ink though the captop. and issue seems to have gone away. i was able to print a 4x8 banner with heavy yellow usage without any issues. Still no idea what caused it but issue resolved for the time being.
Any ideas what would cause yellow on both print heads to suddenly stop?
They work for a few feet after a cleaning then stop again.
Pump is fine when i can see it moving the dampers.
captops installed about 2 months ago. TR2 Inks
installation of the firmware was fine. now on 4.10 same issue print head never leaves dock to look for media width.
I contacted Roland though there website and was told it has to be a hardware issue. I cant understand that since it works fine on 3.1
just wanted to update this. I re installed Firmware 3.1 solved all my issues. then back to 4.00 same issue as before with media width. now back to 3.10 until i can get this figured out.
running only 2 pinch rollers at the moment. have tried 15" material and 30" material. i dont think the issue is the print rollers because the print head never leaves to look for the pinch rollers.
i pull down the lever and instantly 53" is what it says. no searching for rollers takes place.
Hello everyone. just updated my vg540 to the new TR2 ink set. so new firmware and software update along with ink flush ect. the Roland prints fine but i cannot get it to detect media width now. when i load material it goes to 53 inches without even trying to detect pinch rollers.
went into the...
great. i got your website saved. ill be needing a jv33 print head before long as well so ill keep you guys saved. on your roland carts do they come chipped or is it just the bag and i reuse my plastic plate?
powered on the mimaki JV33 and received a diagnostic message showing print head 1 memory 128mb.. i cant get past this screen. I have tried unplugging the printer for a while then plugging back in but still get the same screen.
Any idea on what to try next?
looking for a source or recommendation on mounting composite aluminum to a bus. these would be cycled between 4 signs throughout the year so it would need to be fairly simple to put on and take off.
looking to outsource polyester paper prints.
these would be double sided 4.5"x2" full color with bleed quantity of 5000
please let me know if you know of anyone thanks!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.