• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Error 07 Head ****--

    I learned this later on. I believe I fried the head by hooking the cable to the one right beside it, and also some solvent spilled onto the board of one of the heads that are reading the error. When I swap the cables at the slider the error follows the two bad heads. I guess this is my...

  3. Error 07 Head ****--

    When I swap the cables around on the slider the error moves with the head. Where ever I hook up the first two heads has the * symbol and where ever I hook up the last head has the - symbol. Is it safe to say that the heads need replacing or is there another solution?

  4. Error 07 Head ****--

    update I manually primed the ink to the dampers and reset the machine after reseating the cables and got rid of the error. After the machine has time to warm up error 07 ****-- again. I am a noob and am starting from scratch on this. I noticed that when the pump is running I will see a bubble...

  5. Error 07 Head ****--

    Oh yeah, the printer I am having this trouble with is a mimaki jv3 160s.

  6. Error 07 Head ****--

    I replaced cables and still reads the same. I swapped two cables on the slider board and the error moved so I guess the problem is with the two heads. One head has ink primed to it the other does not. I also tried swapping cables out from slider board to heads with new ones and still the...

  7. JV3 message error 07 head -------*

    Error 07 Head ****-- I replaced cables and still reads the same. I swapped two cables on the slider board and the error moved so I guess the problem is with the two heads. One head has ink primed to it the other does not. I also tried swapping cables out from slider board to heads with new ones...
Top