Search results

Now if I could get some help on mine. It needs calibrated better.

Pull the black head cover and look at the black feed lines. See ink? If one is clear then you have a leak. The feed lines after time will get brittle and crack. Any small leak will cause the head to loose prime. The damper is next, then the capping station and pump. The pump must be able to pull...

I've used routed PVC (Sintra). Works fine unless it's very cold and your sign get's hit by an SUV.

Only the operations manual is posted there.

Pull ink into the damper with the syringe and place back onto the print head. Return the print heads to park. Open the back cover to access the pump and disconnect the the black discharge line. Pull ink with the syringe here also. Reconnect the line. Run FillInk. If you still do not get the...

try a DisWay Wash

Tricks the printer into thinking the cartridge is always full. Problem is, don't run out of ink. It will try to use the empty cartridge to prime the heads. Another question: How well do the blank empty cartridges work? The Mimaki carts have a bag in them so that they collapse as being used. Do...

I've seen them for about $40 each. Wouldn't take long to make that up.

I've seen the cartridge chips for 400ml of ink for only $10, but what about an unlimited set? Wouldn't make more sense to just get chips that never run out?

Make a set of rollers to guide the board into and out of the mounter. The weight of the board makes it drag on the deck. Adding support will allow it to roll right through.

Toss the sled out. You don't need it. First oil the tension screws. They get tight and you'll need fine adjustments. Mount a piece of metal conduit directly behind the top pinch roller so that your laminate feeds under it. This makes the lam roll wrap around more and helps keep it straight...

All the above. 4 x 8 coro flood or cut in under 2 minutes. 18 x 24's in 30 seconds. No I don't use the Big Squigee or any squigee

If you have take up reels, check the motors also in the stand. The ink will leak down there also.

I started using lexjet 55 for coro and stickers. Works better than 3651.

It's ok. You have to keep the bar super clean. Works well for banners. You can also use the ClearShield laminates. It takes some practice to get just right.

They didn't have anything in the store that I felt would vectorize clean. It needs to be perfect. It's a custom font also. I ended up redrawing it letter by letter.

Anyone know where to get the Tractor Supply Company logo? It's not on Brands of the World.

Load the material from the back and release the pich rollers. Goto the front and release the pinch rollers. Pull the media until you hit the next feed roll catch. This helps you get the media square. Release the pinch rollers. Make sure that when the print starts the media passes the fans. If it...

Ask the Mimaki Yahoo usersgroup. Many like the HighLord inks, some like triangle. I'm sticking with the OEM SS2 until someone can show me why thier's is better. I like quality and consistancy, not just cheap. Also the SS2 is the lowest toxic ink that's still solvent. Eco-Sol inks are not as...

Pull it apart and reseat all the cables. Clean that paper sensor under the heads. Pull the control panel and clean the buttons contacts. Perhaps a button got some ink in it and it's shorting out the controls. Pull all the heads then power off and back on without the heads to see if the problem...