• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. HP 360 Latex printing issues

    Hi COLDCUTS, Please try the following, reduce the optimizer from the substrate library (try between 8-12%) and print a test image to check the curing. If the ink is not completely dry increase the temperature. Ideally you want the lowest temperature possible to avoid deformation of the media...
  2. Backlit Fabric on Hp Latex 360

    There are three backlit fabric certified in the HP Media Solutions Locator. The three medias have certified compatibility with HP Latex 360: Decoprint Pearl (DECOPRINT by SENFA) H7806-0401 Digitex Heylux B1 (Heytex Group) 7019 LUXX Backlit Fabric (Georg+Otto Friedrich)
  3. The HP Latex 260, the worst printer

    Hi juf1an, In the link below you will be able to find all the information about the necessary maintenance of a HP Latex 260 Printer. The document is quite long, but you'll find the maintenance information in the section 4 (page 11 to 39) Maintenance and troubleshooting guide
  4. HP 360 - Add profile from interweb

    How to add downloaded profiles to a Latex 300 printer Hello! You can find this information on pages 87-89 of Latex 300 Printer Series User guide. http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c04276511-1.pdf I hope it helps!
  5. checking remaining material

    Substrate length tracking Hello, I would follow the recommendations from the User Guide about Substrate length tracking on page 78:  When the roll is first loaded onto the printer, you have the option (in the Load Configuration screen) to enter the length of substrate on the roll. The...
  6. Has anyone found an uncoated paper for the L360?

    Hi Bly, There are some uncoated papers that work properly with the HP Latex 360. First we have the Alpha3 8002, which has been tested by HP and from which you can even download a profile from the HP Media Solutions Locator are the following: Alpha3 8002 Also there is another paper, the...
  7. Experience printing Dreamscape Suede on HP Latex 360

    Dreamscape Suede is certified by HP to be used on HP Latex 360 Printer. You could download HP made profiles for this media from the Media Solutions Locator in the following link: Dreamscape Suede
  8. Papers and the L360

    I can recommend you one paper that have been tested and work perfectly and which have the thickness you require: HP Super Heavyweight Plus Matte Paper (10.2 mil) There are also several other papers with similar thickness: HP Professional Gloss Photo Paper (E4J42A, E4J43A...
  9. L25500 Prints are printing wrong size.

    I will personally not recommend to turn off the OMAS. The OMAS media advance lecture is much more reliable than the one done by the encoder. When printing determinate medias, dimensional variations from tile to tile can appear, in theses cases I will recommend you to invert the alternative...
  10. Borderless Printing On Latex 360

    Hi BIG EASY DOES IT, Did you selected the borderless option from the SAi RIP menu? if not, go to the Default Job Properties and inside the Format tap, select the “Borderless Printing” check box. Please let me know if this fixes the problem.
  11. 330 vs 360

    The HP Latex 330 and 360 printers have different speeds at different quality modes. Here is some information about both printers that you might find useful (extracted from the product datasheets): HP Latex 330 Printer: Billboard (2 pass): 50 m²/hr (538 ft²/hr) Outdoor High Speed (4...
  12. Latex vs solvent print life?

    Great question, Larry L! You can find information on HP Latex print durability and longevity here: HP Latex inks and print durability. Click on the PDF icon in order to see the whole document. If you have any additional questions after visiting the HP Latex Knowledge Center, I’m happy to help...
  13. Hp 26500. one head issue...always same head..

    Is quite weird that you only have this issue with the black head. I will like to know if the solution of swapping printheads work, if not, although it might seem a bit obvious, I will recommend you the following: 1. Shake the head 6 times before introducing it in its slot as the packaging...
Top