• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Inexpensive Window Perf Vinyl

    Hi Josh, Is the 80/20 and different from the 70/30 aside from the holes/coverage ratio? Same longevity, thickness, etc.? Thanks, Jerry
  2. Question Clear Focus ImageVue 65/35 - Bad Batch?

    Thanks. I'm willing to check it out. Do you have a spec sheet available? I checked the website but couldn't find anything with specifics in regard to thickness, longevity etc. Do you have sample rolls available for testing? What's the cost for PWUV7030 70/30 Perforated Window Vinyl 164’, both...
  3. Question Clear Focus ImageVue 65/35 - Bad Batch?

    Anyone currently using Clear Focus ImageVue 65/35? I've received two rolls that are inconsistent with all the rolls I've used in the past. The backing is noticeably different -- thinner, flimsier -- and the vinyl itself is not as rigid, very flimsy/stretchy. The stretch factor makes installation...
  4. Epson S80600 - White Ink Profiles

    We've considered getting into profiling, but haven't gone that route yet. We're running Onyx Thrive.
  5. Epson S80600 - White Ink Profiles

    Sounds good to me, but it doesn't work here. I'm running Onyx Thrive. For example, in Print Mode for the 3m IJ180 profile I have, there is no option available for a white or metallic ink set. There's only the different pass/dpi options. When we were running the S70 it was the same. In order to...
  6. Epson S80600 - White Ink Profiles

    Thanks for your reply. Our machine, installed in May, 2016, didn't come pre-loaded with any profiles. The tech that set us up assisted in loading several profiles through Epson Control Dashboard so that I would know how to do that. Trouble is, none of the profiles that I've installed through the...
  7. Need Help Production House 12.1 Onyx with Epson S80600-Metallic/White Inks-HELP

    Sorry to hijack this thread, but I have a feeling someone here may be able to help me. I'm wanting to do the same thing as the OP, but with white ink. I know how to do it (I used to do it all the time on the S70), but my problem is I can't find a profile that allows me to print white. I know...
  8. Epson S80600 - White Ink Profiles

    Anyone running an s80600? I'm in need of a profile that allows for printing white ink. Any help is greatly appreciated. Thanks, Jerry
  9. Epson s50670 multilayer with white

    I'd be amazed if the S50 had this capability... I realize it can print white in between two colors, but for it to be opaque enough to block the color from one side to the next would be amazing. Most often when we create double sided decals we'll laminate the second surface side with a 3 mil...
  10. Anyone have success tiling banners on the HP Latex 260?

    Thanks everyone. I'll try your suggestions. Had a little better luck switching profiles (using an HP banner profile for Ultraflex and Duratex). On average the panels tend to be closer in length, the color issue/change is less prominent, and the overall print quality was better (even at 6 pass)...
  11. Anyone have success tiling banners on the HP Latex 260?

    Hi Signdesigner1. We're using 180cv3 here too, so that gives me hope. Did you have any issue with varying length between panels with the 180cv3? Regarding the color shift, I did mean between the left and right side (although I did see a shift from front to back on one of the tiled banners as...
  12. Anyone have success tiling banners on the HP Latex 260?

    Hi Frank. Typically this is not an option for me, since I'm usually using the entire banner surface and they're rarely solid colors (especially toward the edge where the sensor is). Thanks for the info though.
  13. Greetings!! I am new member to this forum from Modesto California! #WestCoast

    Hi Mauricio. I don't personally have an establishment, but I've worked for Haas Graphics for 17 years, and they've been in business for 37. If you ever need anyone for large format printing, we might be able to help. We've got two Epson GS6000's, an Hp Latex 260, a Seal Image 600 laminator, an...
  14. Greetings!! I am new member to this forum from Modesto California! #WestCoast

    Greetings, Mauricio. I'm a new member too. We're just down the road from you in Stockton.
  15. Anyone have success tiling banners on the HP Latex 260?

    Thanks for your reply. I was running Duratex banner media, which is Pitman's (an Agfa company) house brand. Good, inexpensive 13 oz. banner media that's about 9 cents cheaper per sq. ft. than Ultraflex and prints beautifully in the HP Latex 260 so long as you're not tiling. Ultraflex (13 oz.) is...
  16. Anyone have success tiling banners on the HP Latex 260?

    Thanks for the reply. I keep the "flip every other tile" box checked in Onyx for every print, and this banner was no exception, so that wasn't the issue. I'd heard that the Latex 260 had challenges with banner media, but that all that had been worked out. I like to hope that this is operator...
  17. Anyone have success tiling banners on the HP Latex 260?

    Just got an HP Latex 260 with the hopes that it will replace one of the Epson GS6000s we're running. We do a lot of oversized banners (anywhere from 6'-20' high by x length), so we're often tiling. The Epsons perform pretty admirably in this respect. I will see a difference in tile lengths when...
Top