Search results

I have a Roland GS24, use it like a printer. Prep the job, hit print, choose the roland, change preferences, run it.

I have one, but just a few weeks now, so far so good....knock wood. This probably has nothing to do with your issue, but the HDK cartridge has a pump that they say to pump 15 times every week, im guessing to suspend the solids after settling. Have you been pumping your printer ? ;)

You're not using the Epson Edge rip? Have you tried it?

If your using Versaworks, this is what I did before I got rid of my VP300. First use a pantone red, any red you like. Then open the .eps is versa. From the job list - Job Settings then File Format then click convert spot color, then click the Details button. On the CMYK sliders, do 0...

I have done the taping trick, and it works but is a pain, just thought I'd check with the mob to see if anyone had found something I couldn't see. I do textile transfers mostly and the material cost is sick. I will just have to bump the price a penny or two. Thanks for your input

When load a sheet(@24" long) then close the lever, the roll feed in the back spins for a while then it tells me I have mis fed the media

Can anyone tell me if there is a way to print sheets(not roll fed)on the s40600?

Make sure your off contact is even front and back, @3mil all around.

Yes its new. I have tried all pressure settings, no change. I found that sometimes if I restart the cutter or computer, it will cut proper for one, then not. Could this be an operating system problem? I am running Windows 7 64 bit. Or do I have to dedicate a puter to just this RipQeue, as...

Epson 40600 + FC9000 package, using onyx RipQue/Cut Server. Most of the time my cuts are good, but then for no reason I can see, one will start fine, then slowly go out or reg as it proceeds up the page(going north/south, not east/west). My page length at the longest is 30 inches, but happens...

Thanks Julie, I don't use the take up and is off, no difference....arg. Hello Epson, some customers have to pay $20/meter for print stock(only 20" wide I might add)....costly and wasteful. Looks like I will get good at taping the roll end.

Thanks for the input all. I was afraid of that, having to tape each roll end and that is what I did once and it worked, but if i don't get it in time, epson red lights and freezes. Is there a way to tell epson I am using really long sheets?

Hi Everyone, 14 years running my VP300, now have made the jump to light speed with the 40600, real happy with the combo, just have to try to eliminate the waisted shirt transfer material. Whenever I come the the end of my roll, epson stops with at least 24 inches hanging out the back, and will...

Thanks for the input peeps, just on my way to try the showroom VG2....I know I know, BEWARE. They say many improvements, I will see about that.

The majority of my work is print/cut garment transfers, can anyone tell me how the transfers wash after they have been heat pressed onto a garment, printed with the Epson S series? I heard that the new Rolands had fading issues after washing. It's almost time for a new printer/cutter and I am...