I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
When applying the inner print to line up with the outside print is it easily seen with the white trans? This will be my first time doing this as well. I am confident in my ability but any extra tips is always a major plus! Thanks
I am using the same laminate. its a 10 mil motorsports lam. Same roll no changes. Looks like I will be staying late tonight to try and figure this out.. I'll try some of the suggestions mentioned!
Thanks everyone.
OK so i have a UsTECH VT600 and was working AWESOME. Until lately I dont know what the hell is going on but i am getting silvering from hell! And as soon as I load back into the printer to cut the silvering turns into pea size bubbles... It was working amazing just a week ago. I did a 60ft...
Yup everything seems as it should as far as being tight. I looked it over good and didnt see anything that looked wrong or loose. So hopefully its just in the adjustment... Its causing me some serious grief right now thats for sure!
Nevermind I found it. It didnt register in the ole brain, lol. Crop-Cut Adjust. I'll give that a try and see what happens. It was cutting mint and then it changed.. BUT, I did have a little error now that I think back where I had the blade depth set too deep and cut through the backer of some...
I have an XC540 that has been great (knocks on wood) but as of late I have been having contour cutting issue. The cut is off with regular print and cut, as well as if I run reg marks... Not sure why all of a sudden it would change. Any ideas? I can't seem to get it back on track either.
Thanks for the replies. Yeah I am wondering if there is something getting messed up during the export... I have looked and am not really sure where it would be. I will try that JHill. Thanks!
Ok so I use illustrator as well as Flexi-pro and the blacks i can get out of flexi are amazing and deep where as Illy the blacks are not deep black and almost a tint of gray in appearance. I just noticed it bad because I drew up this black and white logo and exported to Flexi and realized i...
I printed the Scan and feed grid adjusted like I should and it made zero change.... I just did a print with registration marks and sheet cut it and then reloaded and it was flawless... I am confused.
For whatever reason my contour cuts are off.. And the weird thing is it gets worse as it moves to the left side of the machine.. I have messed with the feed and scan calibrations and it only seems to make things worse. I had 2 heads changed out recently and I feel like after the head change is...
I have a customer that wants some graphics made for his Can-Am Maverick and wants the yellow to match.. I have literally printed like 50 test pieces and I cant get it... ANy help would be HUGE!!! I know I could use clear vinyl, but they dont make a high tack clear that I know of.. Thanks again...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.