• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. FlexiSign ICC Profile for Roland SC-500

    hi, Im also looking for a Flexisign 10 icc profile for my Roland CJ500 / Converted to SC500. thank you
  2. Rolandl SC 500 works only in Directional print not Unidirectional

    Thanks SFR, that makes sense for every time i do head clean. I have to clean the wiper all the time for it has to much ink on the wiper. I have a ink clog on 2 line and what i did last is place a solvent cleaner inside to prevent the ink to dry up. But by doing that i block the air flow...
  3. looking for ICC profile for Flexisign 10

    Thanks for all the help, I cant find my Old Roland printer SC 500 on the link. Also dont have access. Can somebody can share there Flexisign 10 with Roland SC 500 profile. Need this badly for i just upgraded my computer to Windows 8 and now my Roland colorchoice wont work on windows 8. My best...
  4. Rolandl SC 500 works only in Directional print not Unidirectional

    sorry its the other way around the slower speed. print only one way! :covereyes:
  5. looking for ICC profile for Flexisign 10

    Hi All, Have a working Demo copy of Flexisign 10 and when I print on my SC500 eco solvent. its to dark. Tried different profile from the built in profiles and its all the same. Can somebody share there Flexisign 10 ICC profiles for Roland SC500. Thanks in advance.
  6. Rolandl SC 500 works only in Directional print not Unidirectional

    hi All, Have SC500 converted from CJ500 machine. my problem now is when I print using Unidirectional setting, color drops out after few feet. But when I print Directional setting, print runs ok. I check and make sure the two clear line from the capping station are clear and it was. my questions...
  7. Roland CJ 500 print/cut problem

    If anyone have the same issue, I found out what the problem is. On service mode check your flush alignment setting. Mine was change to +14mm.. set it up as automatic and should be 0. thanks for all the views.
  8. Roland CJ 500 print/cut problem

    Hi All, I have problem with my Print/Cut, its 1/2" off on Scan side. Last change I did before this happen was Replaced new Encoder strip, Capping position adjustment, Locking assembly, flushing position adjustment, Liner encoder check (says completed). Also did the Carriage Wire Tension...
  9. Roland SC500 cant print full banner

    one more thing I notice when it do the head cleaning. There's lots of ink on the wiper, so have to wipe it all the time when do the cleaning. is this normal? I see the both drain tube has ink coming down from the pump. So the capping station and pump works fine. Also note both are brand new...
  10. Roland SC500 cant print full banner

    Full patter Test Print on service mode print fine. It only change color when you print bigger scale drawing or file.
  11. Roland SC500 cant print full banner

    Thanks, I did the service fill test print already and it didn't show any color change. For it only print 1.5" horizontal strip per color. What I did now as per 3hill suggestion to make a blocks solid color and see what color missing. At first I thought that it stops firing until I see the block...
  12. Roland SC500 cant print full banner

    This is what shows on my printout (K,C,M,Lc,Lm,Y) print ok until few inches and notice black, magenta & light magenta change color. Is this main board problem or carriage board? Help would be very appreciated.
  13. Roland SC500 cant print full banner

    Thanks J Hill, I actually watch the printer until print head 1 stop injecting ink. It didn't go to the capping station to do quick clean. But it just normal print but head 1 stops working. Once it started the problem cancel printing and see if there's ink on the damper and if i see visible air...
  14. Roland SC500 cant print full banner

    I tighten the damper connection and did 4x cleaning. I can see ink coming out from pump no problem. Did the test and still doing the same thing. Swap dampers and still the same. Tried printing CMYK in blocks and it shows that the complete head 1 stop printing (black, cyan, magenta). :banghead...
  15. Roland SC500 cant print full banner

    Also one more thing forgot to mention. LH side Printhead I didnt change the Head Rank for its combination of Letter and number. Bought used working printhead, the RH side I manage to change rank ID for its all number. Just the LH which are my black, cyan and magenta are. What do you think this...
  16. Roland SC500 cant print full banner

    Thanks 3hill & vander2 for quick reply. I can move cable closer but don't have parallel port on my computer. I'll try printing it out with box and see on which color is not working. I change dampers but didn't change the oring.. I'll try to tighten up a bit more on hose connecting to damper and...
  17. Roland SC500 cant print full banner

    Thank you for all the views and suggestions. Bought it with clog heads, so replace it myself with the rest of the capping station, pump, dampers. Is it not because my cable to long. Had 6ft parallel cable from printer then another 6ft of parallel to USB connection. Setup as USB01printer. Also...
  18. Roland SC500 cant print full banner

    Just bought used Roland SC500. Replaced Capping station, Pump, heads, dumpers. When printing small stickers its ok, But when you print big banner sign. Color Change 1/3 way, looks like black or other color is missing. Any Suggestion would be very appreciated. Running: Colorchoice 4.5 &...
  19. Ever see a Roland FJ 50 Print head smoke?

    Smoking Print head needs some help! please hi Mrfern, I have similar scenario, cleaning my print head with flush cleaner injecting direct. Now when I did a test print LH print head starts smoking. Immediately shot off the machine and waited 4hrs to turn back on. Now wont turn on and see...
  20. roland printhead meltdown (as in smoke)!

    Cleaning Head with Eco Solvent Cleaner - Tested Print head Smoke hi, Just purchased used Roland CJ-500 converted to Eco solvent. Bought it knowing heads are clog. Tried Flushing it with Eco sol Cleaner, now when I turn the printer on and do some cleaning LH print head starts to smoke. I...
Top