Search results

i have found DX5 on some chinesse web site and there is written that the printhead is used for MUTOH/MIMAKI and the pritnhead they ofer is without memory board. - need to install my currently memory board onto new printhead, so probably this will fit. But what i think about is the color of the...

Hello, i am new owner of mimaki jv33-160. I have bought this printer from owner who told me, that there is necceseary to buy new printhead (he told that the head in the printer os clogged). I have tried to clean this printhead with acetone and reverse water fall. 7 channels were perfectly...

CE5000-120 accuracy / align Hello, I have graphtec ce5000-120 and mimaki JV3. Im using Flexi for both jv3 and ce5000. Today i have tried to print large (100pieces of stickers) printed with 4x registration marks and when i tried to contour cut the sticker, then almost 50 pieces were ok but...

so PSU is still burned (change the IC won't help) and main board is probably burned too. I don't know why, because i have replaced all basic parts like ribbon cables between heads and slider, 4x printhead from digiprint-supplies and lot of another parts. there is no ink leak so i can't imagine...

does enyone has the service manual for the jv3-160sp? i dont want maintenance manual.

Hello, when i have dismounted motherboard from my mimaki JV3-160SP, there was unconnected cable with name CNX3 (or maybe CNX13 - don't remember exacly). I have look at mimaki service manual and there is nothing about this cable. Does everyone know, what this cable is?

has someobody know http://www.inkmed.cn/ repair service? i will send them motherboard and PSU for repair and never heard about this repair service on this forum.

so the PSU has burned one IC (M51995AP). I will buy from ebay this IC and rework PSU. I hope that the others board (IO board, main board, slider board) will be ok. When i think about it, so when the PSU stoped working, why should be damaged something else like for example main board?

i have turn on the main power and the green power and measure. inpput was 230V (I am from europe) and on output was 0V on all wires measured between GND and +35V, +5V, 3,3V. on this board are only 3 connectors - outputs (yellow,yellow, black, black, red, red, black, black, orange,orange), input...

i have measure power suply unit and there is no power on output. so i think that this part is broken. has anybody experience how to repair power supply?

so when the dropped ink dry up, everythings will be ok?

what should be burned on the motherboard? I have looked on ebay end there are lot of transistors for jv3 motherboard, so is possible that this is common defect? on the middle PCB board blinking red light. on the left picture doesn't light any green diode.

please any sugesstion how to solve this will help

is any chance how to detect what is wrong? this is my first reworked machine. ia have unplugged ribbon cables from slider to heads and still doesn't work here are few videos: http://youtu.be/vvydoYF5tuY http://youtu.be/OuA7WbcORnc http://youtu.be/Yd1nSndf9oM http://youtu.be/sIZ5IXyN49Q

is possible that the black color leak after heedle but when i see main board, the was not any color on that board. im scared that the main board is bad

there is no any ink leak. ink tubes are filled for half (not in heads and dampers yet). how can i inspect this behavior?

Hello, i have completly reworked my mimaki jv3-160SP (new ink tubes, fittings, O-rings, 4xheads, 2x pumps, 8x dampers, 4x ad plates, 8x head ribbon cables, 1x waste bottle, wiper, wiper holder, 4x cap tops, maintenance kit, lubricant, clean all main parts like cariage, printing plates...

changing ink tubes