Search results

this is a 100% Fire wire cable. When the cable breaks, various errors can pop up: "Z axis error" , "Gantry motion error" ets. The problem is precisely in him. You can buy an original one www.digiprint-supplies.com , or you can order a cheap one at AlIexpress. A temporary solution to the problem...

Of course they are different. But it is possible. And I know people who are already doing it. They want 1200 Еuro for a new landing plate and another 1000 Euro for a software upgrade. But I don’t want to pay that kind of money, especially since I myself can do a lot of things, but I still lack...

Hello everybody. I am the owner OCE ARIZONA 350 GT. As you know, it has Toshiba CA4 printheads installed on it. But now they cannot be found on sale. And if there is, then at a very high price. But everywhere they sell double printheads CE4 at good prices. Maybe someone has experience or...

I had it. You need to download the manual for the motherboard. See where the button on/off should be installed. Close the two neatly dins. Voila.

this is a 100% Fire wire cable. When the cable breaks, various errors can pop up: "Z axis error" , "Gantry motion error" ets. The problem is precisely in him. You can buy an original one www.digiprint-supplies.com , or you can order a cheap one at AlIexpress. A temporary solution to the problem...

if the damper does not open, but a click is heard, then the problem is mechanical. You need to disassemble and see where that fell. If the click is not heard, and an error pops up on the screen, then either the motor or the curtain position sensor is broken. It is necessary to disassemble the...

1. Bubbles in the head should not be !!!. If air gets into the system, it will stop in the small air filter and will not reach the head. If the bubbles do not go away after 2- 3 purge, or appear again, this is not the correct operation of the ink level sensor. It is either broken or does not...

On my Arizone isn't it? It doesn't matter. Well, OK. If it will be interesting, I will tell.

During the first year of work on the OCE and the use of the original flush, I have 9 !!! damaged printheads. For 8 years of using alcohol - only 3

There is another simple way. 1. go to the date / time menu. I have a time zone of +2. 2. set the time 0:00 3. change the time zone to -13 (you have already minus one day) 4. set the time 0:00 5. change time zone to +2 ...... and so many many times)))) I did that when the oce was under warranty

There is another way. On Windows, you must go to the mmc console. and there you are solely responsible for the ban to change the time for all users, including the administrator. If you can do it, so the date is what you specify it .

If still need. 1. Close Calgary and go to Windows. (you need to connect the keyboard) 2. button start / in the line "run" enter "regedit" 3. path hkey_local_machine/software/oce/aries/configuration/calgary_1/inkcontrol 4. On the right, find the line "temperature" and change it to the desired one.

Hello. Never !!!! use flush on printheads. Flush damaged toshiba printheads. Only alcohol. Ethanol or isopropyl.

the cable can also be if there are different errors on the display at the same time. A simple way to check, change the sides of the cable in places. If the error persists, buy a new cable.

Hi Ricardo. If the buzzer sounds and the "Print failed" screen, it's only the lamps problem. Most likely the sensor of the lamp shutter is defective. In this problem, the key will not help you. I had this. it is on stock in digiprint-supplies.com. p.s. if you really want, I can sell you my key...

And what do you need it for? I tried to get a key for several years. During this time, I studied the machine so much that when I still got the key, I realized that I do not need it. Any problem can be solved without a key. I have arizona 350 GT

SDS key is not needed. 1. in the registry, set the desired values: voltage and waveform. 2. remove the cover where the cooling fluid is poured. 3. disconnect any tube from the cooling pump 4. syringe to exhaust the cooling fluid (not necessarily all) now you can change your printhead I did it...

not worth it to you to take the printer / cutter, you then this will be a lot of problems. Better to take only the printer.

1. Check the air in the ink filters 2. Replace the air filter small. 3. I am working on the 350 GT, a problem I've regularly Keep the air and work in peace. By the way, the more the machine is working, the less there is the problem

still relevant?