• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Keeping Squeegees Clean And Dry

    I have the problem of having my squeegees never drying completely out and eventually they start to mildew. I'm wondering if anyone else has the problem and what they do to stop it. Is it simply a matter of buying a lot more squeegees and trading them out more often or does everyone just replace...
  2. Font ID help please!

    Does anyone have any ideas as to what this font is? the Y is a particular standout. Thanks!
  3. Vacuum Hold Down Question

    I work for a shop that is preparing the purchase our first CNC machine. None of us have any previous experience with them. I think we're going to get the 4'x8' shopbot. Can anyone recommend a vacuum for the hold down system that would be sufficient for holding coroplast, pvc, maxmetal, etc...
  4. Questions regarding cutting order and job spacing

    I use a Roland VS-540i and I've noticed that if I say, have 100 stickers to print/cut, the plotter won't necessarily cut each sticker in order - for example if I have a row of 10 stickers it'll cut the one on the far right first, then skip ahead to the 4th, then back to the 2nd, then over to the...
  5. VS540i question

    Hey, Our shop has a versacamm that inserts about two inches of dead space between each job we send. Is there a setting on the printer to adjust this? Thanks for all the help! Kyle Stewart
  6. VOX organ logo - what's the font?!

    A customer is restoring an old VOX organ and wants to replace the nameplate. Does anyone have a clue as to these fonts? Thanks!
  7. Wide Format Cutter

    Does anyone have any suggestions for a wide format cutter? It needs to be something that can make 96" wide cuts. We currently have a Foster General Purpose Cutter, but it seems to have bowed in the middle and isn't cutting straight. Thanks for the suggestions, Kyle
  8. is there any way to fix this blur? Roland SP54V

    Was your head height set to high or low originally?
  9. Fonts like this

    "we are getting married" look similar (but not totally) like Bakery and Cheddar Jack. Definitely in the same style. For those kind of things I go to dafont and use the 100% Free/Public Domain filters. There's so much variation in fonts such as these that it can take you forever to find an exact...
  10. Gordon Hospital Fonts

    The r in Gordon looks a little like Palatino?
  11. How to remove right pinch roller on VS 540i

    GVP and AMW, thanks for the tips, I was successful in replacing the wheel. The washers weren't a problem as I just magnetized them and stuck them on the sides. Then I saw CSOCSO's input - I noticed a tapering on the right wheel but figured it was what was causing my problem. If you're correct...
  12. How to remove right pinch roller on VS 540i

    The rubber tire on my right side pinch roller for a VS 540i has started to roll off the wheel. It's causing massive skew issues. Is there any easy way to get the roller out of the machine to replace it? I've removed the block but I can't get to the screws on top of the roller to take off the...
  13. Latex 310 crashes during print calibration

    I haven't called HP yet, but the machine should still be under warranty, it's only been a few months.
  14. Latex 310 crashes during print calibration

    Big Easy - Thanks, please send that my way - I have the manual for the 310 and it said it was a firmware issue. I'm new to this machine though so you know better than I do. greysquirrel - Printheads are saying they're OK, no inks are expired. I'm using Oracal 3641 & the profile for it...
  15. Latex 310 crashes during print calibration

    It's a system crash, sorry, should have clarified. And yes, just when calibrating.
  16. Latex 310 crashes during print calibration

    I've noticed banding from my magenta head. Cleaning the head and aligning the printheads is not totally correcting the problem. As I recently put in a new magenta cartridge I decided to calibrate the color but in the middle of doing that the printer crashed (79:04). Come to learn that meant I...
  17. Flexi 10 and HP latex 310

    as
  18. custom keyboard shortcuts in flexi 10

    I'm looking for a way to create custom shortcuts in flexi. For example, I'd like to create a custom shortcut for "exclude common" that's listed under the effects drop down. Thanks in advance, Kyle
  19. Latex 310 surge protector

    Can anyone recommend a 220V surge protector to use with the HP latex 310? Thanks
  20. UPS/battery backup, protection

    What model is that? I'm getting a proxy error when I click the link.
Top