I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
WHAT!?...
Just completed doing a complete squeaky clean install of my network and all the printers and found out the Encad end of Kodaks legacy support are completely gone & Encad's name is now for sale...
www.kodak.com/support/discontinued/wideformat/novajet :frustrated:
which used to...
Yes I know what the suggested standards are on port type to lenghts are... Was wondering if the the cable length would be a only factor to reguarding only print/proof one...
It's gotten so predictable that on page 1 now I pull the good media and load in some garbage media and let it dump...
Ok threw the Fiery away and resolved the color issue without it.. Dumb me is all I have to say about that...
NEXT QUESTION::
In my offce which is a measly 13' X 13'... I seriously don't want to run an IEEE cable that goes diagonally across the room, where I will stub it on the chair everytime...
So.... recalibrated the printer, wiped all the profiles, found some newer ICC profiles from Kodak & threw the Fiery in the garbage...
Problem Solved.... runs like a charm but...
next question.... needs new thread... IEEE cables longer than 12Ft....
Yeah I know how much most here loathe these ancient stuffs but...
it's what I got not to mention what I can afford and has done what I have completed so far phenomally and only want to make it work better.
Ok, fiddled & found out that it had dead cmos battery, changed it... boot checksum error...
Yes but keeps showing up as unknown device
When I purchased it, it came from a working enviroment so I saw it working and I can connect it to the printer and make it run the tests so I know it is working its just not getting across the network... So I know I am just screwing up something...
I know this isn't supposed to be rocket science but...
I have an Encad 700 60" machine (yeah ok... old machine Boo, Hiss but it does what I need for what I do quite well), a roland PC12 and an Ioline IS130 60" plotter. I'm running ONYX 6.5, Flexi 7pro and Corels pieces and parts.
The Encad...
Came across the below.. Kinda sound like the VBA mainly pertains to mostly making functionmacros within the program it sounds as if it is fully functional. and then probably won't let you publish, or more lkely doesn't want you to but will let you, to anything other than the machine it is...
I've done the CS3 tryout at least 2-3 times over the last year... and I don't if it's me or what But I just absolutley hate it's workflow/interface... I suppose if I were acustom to its layout it would seem more familiar or flowing but for the life of me it took me endless time just trying to do...
Ok... so here I am... Please help me.
I want to purchase a copy of Corels X4 suite.
Can someone tell me the difference between an acedemic non-manual version VS. a ful retail style version?
Please someone clue me in on this.
Is it a functionality issue? when you pit acedemic VS. Store...
when someone asks me to do like a trucs window... or similar
under 48" $65 installed....
one color... in basic avery's...
over 48" $100 installed
if more colors? .
.. I ussually add $25 per color to the aboves...
And if if someone is looking for the 'catchy' vynils like reflectives...
I agree ^^
Is clean & simple and does convey the message but..
Seems to be lacking a smidge in the flair department.
Especially of it's you're truck.
But what do I know, I own a glass shop *shrugs*
It's an electronicly coded security locking device used for Hardware or Software. In other words if the key is missing then something is not going to let you use it witout its presence to 'unlock it' on the system...
I would ask which key (dongle) is missing and then ask why they are offering...
Just in the last few week this has happened to me... With the exception is that it give me an error spalsh screen pertaining to the security lock and asks me to please remove or revert?
But just flushed & re-installed the entire system and re-installed without clutter and every program I...
Yup Flexi starter is cut only!
the print features are locked in it. You don't get that luxury until you shell out a couple grand to Scanvec for Fsign-pro or Fsign-expert.
Just curious as to why you can't print from Coreldraw though... Me thinks maybe you have the print...
I just started using Onyx...
Workup a profile
Save
Process
*POOF*
Print
All I find myself asking now is this...
Why wasn't using a RIP program ten years ago :)=
Now only if I could figure out why when I get down to the 34th-ish inch of any print over 48" in width, it crumples the...
In flexi how I do it is..
Put bitmap on the stage (duh)
(dont forget that the bitmap has a registration mark if you are doing the cut job on seperated machines)
use the trace bitmap tool
weed out any holes or garbage you dont want in it
then select the final trace shape thats left and hit...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.