I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
you can also send the job to the plotter directly from illustrator with its plugin.
you already have a drag plotter, your roland, now you need a tangential one
The "Send to GoSign" command is only useful if GoSign is installed on the same PC where Illustrator is located. In this case the Plug-in saves the current job in a PDF format file named Import.pdf in the specific foder "Documents->Summa GoSgn->Direct mode" and automatically executes GoSign and...
You must manually install winplot plugin but... the command to "add marks" works, however those to "send to winplot" and "export to PDF" do not.
Since Winplot is no longer supported by Summa I don't think they will be fixed
To use GoSign you need to update the firmware of your S Class2 to the latest version (revision 27):
https://www.summa.com/media/e02mpwys/md9981_s2_027.summa1
The same with old SummaCut, they must use the latest version of the firmware to use GoSign
MacSign Cut has been dismissed from August 2020.
It has been replaced by MacSign Plugin. A plugin to send cutting data directly to the plotter from Adobe Illustrator.
You can increase FlexCut panel size
GoSign automatically turns on FlexCut panelling. S3 firmware uses 2 different panelling sizes, one for Flexcut and one for all the rest.
Flexcut panelling size can be set in FlexCut panel on the plotter
Are you sure? Change the cutting head it's not just removing the old one and fitting the new one.
These are the steps a technician should follow to do a good job:
- Remove old cutter head (ok, this is easy)
- Move OPOS sensor from the old head to new one (this is easy too)
- Fit new cutter head...
If it is a 64-bit version of Windows 7 you may have problems installing the Summa USB cutter drivers.
Download USB Cutter driver from Summa website, try to install them and see if it gives an installation error or not.
4 rollers in 2 packs, right? How did you install them?
Make sure that the outermost pinch rollers, the ones that make traction, must belong to the same pack
Did you try using another PC? Install SCC and Summa USB driver, a fresh download of the firmware file than retry.
In any case you are not forced to install GoSign, the FlexCut function can also be enabled from WinPlot
Now you know that it is ONYX that changes the alignment mode set on the plotter. It remains to understand why with "Force OPOS XY" the job is done better than with "OPOS XY", in theory they should be the same, in theory...
The only thing I would recommend you is to perform a precise "OPOS...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.