• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Thin polyester fabric cutting

    Hey Waterloo, Did you get a chance to call Matt at Blackman & White in Maldon? They have a new Ultrasonic knife that may cut and sedge seal you poly fabric. Check it out and go see it. Bill
  2. Flatbed UV Suggestions

    Make the Trip to San Antonio to visit with Patric Coldaway at Digitech. you will not regret it. The TrueFire printers are one of, or the most, precision made flatbed printer ever. US made and supported. SwissQ is nice, great engineering and has some very clever features and has good print...
  3. Thin polyester fabric cutting

    Go see Blackman & White-BW. Factory is in Maldon 90 miles east of you. Call Matt Tillett (0)1621 843404 or email Matthew@bwcutters.com. Video installing laser and removable aluminum conveyor and showing laser and rotary knife fabric cutting. Best regards, Bill Grambsch
  4. Routing sandwiched Arcylic and ACM

    Which Zund router, 1Kw or 3.6kW? Tool changer?
  5. Neither Graphtec Nor Zund See Marks Printed on Some Materials

    That may work. Certainly a low cost way to test and see if your camera might work like the MCT one did. The final config was a red LED ring light that has similar light output as the white LED. Probably need to make some contrast adjustments in the ZCC settings. Just for S#!Ts & giggles I...
  6. Neither Graphtec Nor Zund See Marks Printed on Some Materials

    A few years ago when I was selling MCT cutters I had a customer who wanted to laser kiss-cut a clear film with a clear release liner. The problem was the white LED light was reflecting off the aluminum conveyor belt and confusing the camera causing it to misread dots no matter how the camera...
  7. Discussion Choosing the right 60"+ LAMINATOR

    Wyld Bill. Good to hear about your experience with AGL. I also suspect that you would say over time well it was well worth the additional money you spent vs. lower cost laminators. Bill
  8. Discussion Choosing the right 60"+ LAMINATOR

    William, I sold a lot of AGLs back in the 90s (Encad days) and early 2000s. IMO it is the best made and designed laminators ever made. Here is a Video Link to and AGL video. If you look for used AGLs on any use equipment site, ebay, etc., they are not there, no one sells them unless they are...
  9. B

    rdelight, You should take a look at AGL Laminators, the best laminators ever made. It...

    rdelight, You should take a look at AGL Laminators, the best laminators ever made. It eliminates tracking issues as well as silvering. Link to Video.
  10. Esko X24 vs Zund G3 L-3200

    MCT won SGIA Product of the Year - did you see it next to Zund at show Zund is faster than Esko X24 if it is what was called XN24 before. Esko has rack & pinion and Zund is belt drive. MCT VersaTech2 1.6M should be considered also. MCT founders invented iCut now owned by Esko and know cutters...
Top