• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Mutoh 426UF - yellow color band over all print area

    Hey guys, I've getting annoyed on and on. Last time, I've problem with leaking head. It's about year ago. It's at least 12 months and there you go... another problem. I've yellow color band over printarea. Did anyone has these issues on Valuejets? Yeah, it's 100% electrical problem. I've...
  2. MUTOH 426UF - ink on head problem

    Thank you for fast response and your tip. I thought it could be damper. This machine is nightmare. It's same hardware in it as in LFP printers (except uv lamp, table and other), but I had hard times with her. Hope that problem is caused by bad dampers. Previous head went gone by stupid mistake...
  3. MUTOH 426UF - ink on head problem

    Hi guys, I've recently problem with ink bubbles on head. The head is same on any other Mutoh machines. Its DX7 head. Normally everything runs smoothly, but out of nowhere the prints are faded. When I look at printer head, there are bubbles of color on it (see attachment). I noticed it...
  4. Question VersaWorks - GX-24 + Mutoh 1624

    Hey guys! I was wondering, if I could combine my #Mutoh VJ1624 as a printer and #roland #GX-24 as a contour cut for stickers jobs in Versaworks. I would like to use #perfcut feature. Our standard workflow process - Design stickers with cropmarks in Illustrator. Exporting cut files (.eps) and...
  5. MUTOH 1624 - The K and Y ink got into dump overnight

    Hey guys, thx for reply. I did many researches and i think that was siphon effect. I left cleaning fluid in cap top and this might cause this ink loss. The pipes were not connected to waste tank. They were freely hanging in to mug of waste ink.
  6. MUTOH 1624 - The K and Y ink got into dump overnight

    Hey guys, I'm asking someone for help, with this strange issue. I went to my office in a morning, started machine and see ''Subtank refill'' on display. Opened up doors on mutoh and see, under the capping station, the mug full of ink (I'm using mug for dump ink, under the capping station for...
  7. Need Help MUTOH 1624 - ink misfire - bad dampers?

    Hello DSD, First years I was using mutoh eco solvent inks, after 3 years converted on UMS Mutoh inks. My technician told me, thats a miracle when I m prinitng another 3 years on UMS inks and head still printing :D
  8. Need Help Mutoh VJ 1624 problem with vertical bending and color bleed

    Hello idprintprod, I've came late, but whats the results of your problem. I've seen your photos and I saw very brightly cross contaminations as Solventinkjet mentioned. I've had this problem every time, that my maintenance unit starts acting up. Try clean capping station very preciesly with...
  9. Mutoh Randomly Printing Grainy

    hey CaliGraphics, did you tried to change print patterns? It looks like you used different print patterns. That piece on the right side looks like Fog pattern, bottom piece might be Wave pattern. Its kinda tricky. Did you using exact print profile that match your material? If you printing on...
  10. Need Help Mutoh ValueJet 1624x Error E082Err Wiper Sns

    Hey RiSun, I had this problem repeatedly. It caused sliped gear on maintenance station. Your machine has setted autocleaning, i guess after 8 hours. Your machine run cleaning and the problem appears near 65% of cleaning process. The gear start turning on opposite way to slide wiper back towards...
  11. Need Help MUTOH 1624 - ink misfire - bad dampers?

    Hey guys, I've got update. I was trying to print different patterns and yes, small drop familly is problem for printer. If I perform pattern print, SDF pattern is fuzzy as hell. MDF or LDF is way better, but lines are little bit curved. I've got messy head cables, I''ll try clean it them, but I...
  12. Need Help MUTOH 1624 - ink misfire - bad dampers?

    The machine is 5 years old and dampers never been changed since installation. I only changed capping stations. Thanks for reply
  13. Need Help MUTOH 1624 - ink misfire - bad dampers?

    Hey guys, I_ve got issues with my #1624. My prints were banded, so I performed nozzle check. #Nozzles were ok, but #banding didnt dissapeared. So, I took loupe and look closely to nozzle check pattern. I saw that horizontal lines were ok, but vertical lines of cyan were misfired. So i decided...
  14. Has anyone had problems using Mutoh UMS inks...

    Hi all, I want only tell, that I was converting my 1624 to UMS about 2 years back and all systems go :) Second thing, I printing about 1500m2 per year and cleaning every friday. Every year I changing cap station. ZonePrint s.r.o. Brno, Czech Republic Mutoh 1624 & 426UF Roland GX-24, Secabo...
  15. vj1324 no waste tank

    Had this problem when I was moving printer to another location. Someone pulled out waste tank out and torn out cables. Just connect 2 cables together, error message will disappear. Turn bottle or bucket under waste ink tubes to collect waste ink. ;) ZonePrint s.r.o. Brno, Czech Republic Mutoh...
Top