Search results

This may seem like a dumb question, but I've tried everything I can think of and this is a stumper. I have a GFP 355 Top Heat laminator, and the flip-up feed table is locked in the down position. I can't swing it up any more, it seems to be locked on the left side so I can't swing it up...

A customer is looking to get an upgrade on their road sign. As you can see in the photo, the bulbs are burned out and they want to upgrade to a new LED panel so they can be more flexible with graphics. The sign is in Roxboro, NC. Is there someone in the Raleigh-Durham, NC area that I can get...

So this is new today. I open a file, do my normal stuff to tell it to cut a contour line, and it sends the print file to the RIP, but not the cut file. I even went back and grabbed old saved print/cut files, and tell it to send to RIP and the print file will be fine, but it doesn't send the...

Can anyone ID the Haunted Hayride Barn font? Please and thank you :)

I have an HP 335 that continues to warp this material when it comes through the heaters. See attached pic. This is Nekoosa (RTape) Synaps OM 14Mil Poly rolls. The attached pic is run 12 pass, 207 degree, 100% saturation. What do I need to do to avoid the warping? Thanks in advance.

Hey folks. I need to get a small table top hole punch that can punch a single 3/8" hole through 10mm coroplast. I have tried drilling the holes and using a punch tool w/hammer, but neither option gives me a clean cut. I don't have a CNC, so that's why I'm looking for some sort of small...

Looking for a font ID on this. It may have some hand-tweeked letters, but curious what the base font might be. Thanks for your help.

I create 28X44" "posters" that go into outdoor frames (stand frames and wall frames, that have a backer-board). I normally use RTape Synaps OM Polyester Film 14 mil and laminate it with Drytac Interlam Pro Emerytex 4 mil, printed on an HP335. This seems to be the right combination of vinyl...

Has anyone used Starflex gloss 13oz banner material before? My supplier is recommending it, but I've never used it before. I'd run it on a HP Latex. Any feedback from those who have used it before would be appreciated. Thanks :)

Hey folks, I'm looking into some sort of an application roller for my 5X8' Rhino work table. Having an application roller table would save me so much time, but I don't want to invest in a whole table setup. Is there such thing as an add-on kit? Something that straddles my table and is on...

I'm curious what everyone else is using for their main work table. I presently have the Rhino work table that has a cutting mat on it. With 5 years of use now, there are so many cut marks on it, plus when I do wet mounting the solution gets trapped in the cuts and has warped the mat. It's to...

Font ID please. I don't think it's italic, it's just the angle of the photo. It's on a headstone. Thanks.

Anyone got an idea on this font ID. The closest I could find was circesis, but that's not it. Thanks in advance.

Need help IDing this font of "magic wash" . I know the m and s are special, but what do you think the main font it started from was? Thanks :)

I'm trying to find an ICC profile for Flexi. I'm using Magic SCF7 6.5 mil clear film on my HP310. Magic doesn't have the profile, HP doesn't have the profile. Anyone used this stuff before who has hand-built a profile? Help. Thanks, Mary

I presently have a 4-1/4 year old HP Latex 310, with over 58K sqft. printing in its time. I'm considering upgrading and keeping with the latex printers because I need to laminate things immediately after printing and HP seems my best option (?) I've got questions, and would love feedback to...

I don't do very many radius corners, but when I have the need I sure wish I had one rather than outsourcing. I'm looking for a small table top corner manual corner punch that I can use on .040 aluminum and 3MM ACM board that cuts 1/2" radius. Don't want to spend more than $200 on it, if that's...

This may seem like a simple question for folks, but it's the first time using foam tape for me. I need to stick some small aluminum signs (9X12) and some some styrene signs (6X10) to some outdoor metal square poles, and I saw other folks using foam tape. I bought what I thought was high tack...

I know this question has been asked enough times in the past. However, all I see are old threads dating back a couple years. Technology changes so quickly, I'm curious if anyone has come up with a better hand tool to cut shapes out of 10mm coroplast. I don't want to invest in the $$ for a...

Has anyone had this problem before. When my light magenta ink gets low, all my prints seem to run hot on the magenta. It's like the printer is purging extra ink and over compensating, and all my colors have a tinge of red....it really shows up in the white/light grey areas... when I finally...