Search results

Got a pic of your nozzle check pattern? Sent from my iPhone using Tapatalk

Yes, set an eps margin larger than 0. Should do the trick. Sometimes i have not been able to set it in the job, i have my default settings set to 1 so anything i bring in to print will take the setting regardless. Sent from my iPhone using Tapatalk

Power the machine off, use multimeter to check if blown. This type needs to be desoldered to replace, other types the fuse sits in a cradle and can be removed with tweezers. Fuses can be bought on ebay for a few dollars. Sent from my iPhone using Tapatalk

Possibly static, but check head height definitely. Sent from my iPhone using Tapatalk

I cant agree with you more joe! Ive been caught out with advice i got online in the past. My comments are purely based on my own personal experience on the field and the unusual problems ive come across. Sent from my iPhone using Tapatalk

Is the wiper cleaning the head properly in normal clean function? Ive seen machines that when the wiper rotates to wipe its in the wrong position. Other than that im out of ideas! Sent from my iPhone using Tapatalk

Cant rate the swissQ machine high enough for a flat bed but cost scares people away. Superfast print speeds, flat bed with roll to roll featured, opt up to 18 print heads, robot loading automation option... list goes on. Sent from my iPhone using Tapatalk

Overspray. Check the bidirection adjustment. If ok, possible static issue with media, if static not an issue, head is worn. get a new head for a perfect firing pattern. But id replace other heads before the cyan going by the nozzle pattern. Do tou know what the shot count is for the cyan...

Electrical issue. Ink leak in the head connectors, if you check and no ink leak then its a head board issue. Have seen this on a ricoh printer and had to change a head, head board, cables and main board. Sent from my iPhone using Tapatalk

Ive seen this a few times on sites and cane down to machine had a head strike and damaged the edge of the print head which allow ink to leak out. Unfortunately had to change the head and being the dx7 head - not cheap. A faulty damper will result no pressure and ink will not hold and just flow...

Deflection in nozzle usually caused by poor cap top maintenance and dirty wipers. The wipers will push dry ink across the head and smear rather than clean. If the captops are not cleaned and maintained then a poor seal is created and ink just lingers around the head, dries in the nozzles and...

Ive had this same issue on an XJ640, there was an ink leak into the head connector and it shorted the head board. Took me 6 fuses to work it out. New head board fixed the issue. Ive heard of people changing the transistors and got success but i did t have the time and customer wanted machine up...

Firmware update to 2.10 fixed alot of issues, these machines have a decent memory but a large amount of nodes can complicate cuts, something ive only seen on older machines. I have installed quite a few GR cutters and all customers have experienced faster operation than their older machines. Id...

Keep trying the code until you get it right. Sent from my iPhone using Tapatalk

There is no way to get rank from heads if you mixed them up. The rank is a calibration number for correct firing pattern. After market heads or wrong ranks will show a "incorrect head installed" message and will attempt to clean more often (past experience). Running machine in service mode all...

Yes, press pause when "heating up" message appears. Sent from my iPhone using Tapatalk

the head ranks are stored in the machine memory. can only be access via service mode.

Hi all! Yes Jason, got it in one!

Hi all, new user from Sydney Australia. I'm fairly fresh to the sign industry, currently work for a company as a service tech Doo g installs and maintenance for a range of machines we supply even ones we don't. Has been a steep learning curve but in time I guess will be easier! After a bit of...